锐客网

  1. 首页 > it技术 > >

Junos路由器静态路由及动态路由rip和ospf配置测试


【Junos路由器静态路由及动态路由rip和ospf配置测试】一.测试拓扑：
Junos路由器静态路由及动态路由rip和ospf配置测试
文章图片

二.基本配置： A.R1：
interface Ethernet0/0
ip address 202.100.100.1 255.255.255.0
no shut interface Loopback0
ip address 1.1.1.1 255.255.255.255 B.R2: interface Ethernet0/0
ip address 202.100.100.2 255.255.255.0 no shut interface Ethernet0/1
ip address 202.100.1.2 255.255.255.0 no shut interface Loopback0
ip address 2.2.2.2 255.255.255.255 C. JUNOS1： set system root-authentication plain-text-password
set interfaces em0 unit 0 family inet address 202.100.1.10/24
set interfaces em1 unit 0 family inet address 10.1.1.10/24 D.R3：
interface Ethernet0/0 ip address 10.1.1.3 255.255.255.0
no shut interface Loopback0
ip address 3.3.3.3 255.255.255.255 三. JUNOS 静态路由配置： A.配置方法： set routing-options static route 0.0.0.0/0 next-hop 202.100.1.2 commit B.测试： root> ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1): 56 data bytes
64 bytes from 1.1.1.1: icmp_seq=0 ttl=255 time=51.869 ms
^C
--- 1.1.1.1 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max/stddev = 51.869/51.869/51.869/nan ms 四.RIP动态路由配置： http://www.juniper.net/techpubs/en_US/junos13.3/topics/topic-map/rip-authentication.html --junos如果不配置认证，不用配置策略，配置认证，如果不配置策略，接口发出的rip包不会带有认证信息，junos只能接收rip。 A.JUNOS: ①配置策略： set policy-options policy-statement advertis-routers-through-rip term 1 from protocol direct
set policy-options policy-statement advertis-routers-through-rip term 1 from protocol rip
set policy-options policy-statement advertis-routers-through-rip term 1 then accept ②配置接口，将接口加入group set protocols rip group rip-group neighbor em1.0 ③group export策略 set protocols rip group rip-group export advertis-routers-through-rip ④配置认证 全局： set protocols rip authentication-type md5
set protocols rip authentication-keycisco 接口： set protocols rip group rip-group neighbor em1.0 authentication-type md5
set protocols rip group rip-group neighbor em1.0 authentication-keycisco B.R2： ①基本配置： router rip
version 2
network 10.0.0.0
network 192.168.1.0 ②配置认证： key chain rip
key 1
key-string cisco
interface Ethernet0/0
ip rip authentication mode md5
ip rip authentication key-chain rip 备注：测试时发现用c2691-adventerprisek9-mz.124-15.T14.BIN的2691的路由器配置完rip认证后，rip包中不会有认证信息，可能是IOS的问题。 C.验证： root# run show route

inet.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

3.0.0.0/8*[RIP/100] 00:09:09, metric 2, tag 0
> to 10.1.1.3 via em1.0
10.1.1.0/24*[Direct/0] 00:28:05
> via em1.0
10.1.1.10/32*[Local/0] 00:28:05
Local via em1.0
13.0.0.0/8*[RIP/100] 00:09:09, metric 2, tag 0
> to 10.1.1.3 via em1.0
202.100.1.0/24*[Direct/0] 00:28:05
> via em0.0
202.100.1.10/32*[Local/0] 00:28:05
Local via em0.0
224.0.0.9/32*[RIP/100] 00:01:10, metric 1
MultiRecv
R3#show ip route rip
R202.100.1.0/24 [120/1] via 10.1.1.10, 00:00:19, Ethernet0/0

五.OSPF动态路由配置: http://www.juniper.net/techpubs/en_US/junos13.2/topics/topic-map/ospf-authentication.html
A.R1： router ospf 1
router-id 1.1.1.1
network 202.100.100.1 0.0.0.0 area 0 network 1.1.1.1 0.0.0.0 a 0 interface Ethernet0/0
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 cisco ---链路认证 B.R2： router ospf 1
router-id 2.2.2.2
area 0 authentication message-digest
network 202.100.1.2 0.0.0.0 area 0
network 202.100.100.2 0.0.0.0 area 0 interface Ethernet0/0
ip ospf message-digest-key 1 md5 cisco
interface Ethernet0/1
ip ospf message-digest-key 1 md5 cisco ---区域认证 C.JUNOS: set protocols ospf area 0.0.0.0 interface em0.0 authentication md5 1 key cisco D:验证： root# run show ospf neighbor
AddressInterfaceStateIDPriDead
202.100.1.2em0.0Full2.2.2.2132
root# run show route protocol ospf

inet.0: 10 destinations, 10 routes (10 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

1.1.1.1/32*[OSPF/10] 00:00:04, metric 12
> to 202.100.1.2 via em0.0
202.100.100.0/24*[OSPF/10] 04:48:10, metric 11
> to 202.100.1.2 via em0.0
224.0.0.5/32*[OSPF/10] 04:48:22, metric 1
MultiRecv
六.OSPF和rip双向路由重分布配置: A.RIP往OSPF： ①配置策略： set policy-options policy-statement into-ospf term rip-to-ospf from protocol rip
set policy-options policy-statement into-ospf term rip-to-ospf from route-filter 3.0.0.0/8 exact
set policy-options policy-statement into-ospf term rip-to-ospf then accept set policy-options policy-statement into-ospf term direct-to-ospf from protocoldirect set policy-options policy-statement into-ospf term direct-to-ospf from route-filter 10.1.1.0/24 exact set policy-options policy-statement into-ospf term direct-to-ospf then accept set policy-options policy-statement into-ospf then reject ②调用策略： set protocols ospf export into-ospf③验证： R1#show ip route ospf
O E2 3.0.0.0/8 [110/2] via 202.100.100.2, 00:07:57, Ethernet0/0
O202.100.1.0/24 [110/20] via 202.100.100.2, 00:10:49, Ethernet0/0
10.0.0.0/24 is subnetted, 1 subnets
O E210.1.1.0 [110/0] via 202.100.100.2, 00:00:04, Ethernet0/0 B. OSPF 往 RIP ： ①配置策略： set policy-options policy-statement into-rip term ospf-to-rip from protocol ospf
set policy-options policy-statement into-rip term ospf-to-rip from route-filter 202.100.100.0/24 exact
set policy-options policy-statement into-rip term ospf-to-rip from route-filter 1.1.1.1/32 exact
set policy-options policy-statement into-rip term ospf-to-rip then accept
set policy-options policy-statement into-rip term direct-to-rip from protocol direct
set policy-options policy-statement into-rip term direct-to-rip from route-filter 202.100.1.0/24 exact
set policy-options policy-statement into-rip term direct-to-rip then accept
set policy-options policy-statement into-rip then reject ②调用策略： set protocols rip group rip-group export into-rip③验证： R3#show ip route rip
1.0.0.0/32 is subnetted, 1 subnets
R1.1.1.1 [120/1] via 10.1.1.10, 00:00:24, Ethernet0/0
R202.100.100.0/24 [120/1] via 10.1.1.10, 00:00:24, Ethernet0/0
R202.100.1.0/24 [120/1] via 10.1.1.10, 00:00:24, Ethernet0/0

    推荐阅读


    上一篇：使用Swagger-UI进行接口测试

    下一篇：Hadoop|MapReduce编程模型“WordCount”实例分析