锐客网

  1. 首页 > 睿知 > >

爱普生230英文清零步骤

经验分享睿知

1. Turn off the Epson 230 printer.
2. Unplug the power cord from the back of the printer.
3. Disconnect all other cables connected to the printer, such as USB or networking cables.
4. Press and hold the power button while plugging the power cord back into the printer.
5. Continue to press and hold the power button until you see the printer display prompting you to select a language.
【爱普生230英文清零步骤】6. Select your language using the Up/Down arrow keys and the Enter key on the printer display.
7. Press the Setup button on the printer display to access the Setup menu.
8. Use the Up/Down arrow keys and the Enter key to navigate through the Setup menu and select “Factory Reset”.
9. Use the Up/Down arrow keys and the Enter key to select “Yes” when prompted to confirm the factory reset.
10. Use the Up/Down arrow keys and the Enter key to select “Yes” in the next prompt to erase the stored data.
11. The printer will now display a message indicating that the factory reset is complete.
12. Press the Setup button again to go back to the Setup menu.
13. Use the Up/Down arrow keys and the Enter key to select “Copy Settings”.
14. Use the Up/Down arrow keys and the Enter key to select “Cancel” when prompted to copy settings from another printer.
15. The display will now show a message saying “Ready”.
16. Press the power button to turn off the printer.
17. Unplug the power cord from the printer.
18. Disconnect any other cables connected to the printer.
19. Wait for 10 seconds before plugging the power cord back in.
20. Press the power button to turn the printer on.
21. The printer is now reset and ready to use.

    推荐阅读


    上一篇：爱普生t50废墨垫清零

    下一篇：爱普生绘图仪墨量清零