爱普生l455清零错误

Epson L455 Printers Error Resetting Procedure
Epson L455 printers are some of the most popular printers used in many businesses and homes everywhere. However, sometimes they may encounter an error that requires a reset. This guide will take you through the necessary steps to reset your Epson L455 printer.
Step 1: Start by powering off the printer. Disconnect the power cord from the rear of the printer.
【爱普生l455清零错误】Step 2: Now press and hold the power button on the printer for at least five seconds. After the time has elapsed, the printer should have reset itself and the error code should have cleared.
Step 3: Re-connect the power cord to the printer and power it back on.
Step 4: Now you will need to check the Error LED indicator. If the Error LED light is still displaying, then you may need to reset the printer. To do this, press and hold the power button again for at least five seconds and then release it.
Step 5: The printer should now have reset itself and the Error LED light should be off.
Step 6: Finally, check the printer’s LCD display. If the LCD display is still showing an error message, then the error is still present. To resolve this, you may need to contact an Epson technician for assistance.
If you followed all these steps correctly, your printer should now be reset and the error code should have cleared. After resetting the printer, it is important to go through a full power cycle. This means that you should power off the printer and disconnect the power cord from the rear of the printer. After a few minutes, power the printer back on and then continue with printing as normal.
In the event that the error persists even after resetting the printer, you should contact an Epson technician to further diagnose and troubleshoot the issue. The technician will likely ask you to provide the error code that was displayed on the LCD panel. It is important to have this information ready when speaking to the technician as it will help them to identify the exact issue more quickly.

    推荐阅读