Android驱动开发---Linux Kernel/HAL Layer/Jni Layer实例全集 _Android驱动

知识养成了思想,思想同时又在融化知识。这篇文章主要讲述Android驱动开发---Linux Kernel/HAL Layer/Jni Layer实例全集相关的知识，希望能为你提供帮助。
本人在开发android Nfc POS之初，探索调试了一番驱动，目前在Nexus 5X 7.1.1上已经调成，之前的步骤可以参考我发的文章，Android驱动开发经验分享如下。
1. Linux 内核驱动实例【Android驱动开发---Linux Kernel/HAL Layer/Jni Layer实例全集】以下均在Android Linux内核目录下操作，在drivers目录下创建驱动目录hello
这个目下要创建3个文件，hello.c, Makefile and Kconfig
1.1 hello.c
cd drivers
mkdir hello
vim hello.c
code as follows:
/linux kernel driver: hello.c => /dev/hello /
please find the code in the below. here skip the code to make the page clean and clear.
1.2 Makefile
Create the Makefile and add:
obj-y += hello.o
1.3 Kconfig
Create Kconfig and add:

config?HELLO? tristate?"Eric: First Android Driver" default?n help This?is?the?first?Android?driver.

this file is used when we make menuconfig.
1.4 Modify drivers/Makefile
Add following in the end
obj-y += hello.o
1.5 Add the driver into system configuration
Before we build the kernal, we need to config the system.
1.5.1 Modify arch/arm64/Kconfig
Add following in the end
source "drivers/hello/Kconfig"
It seems that this config not work, may be skipped.
1.5.2 Modify drivers/Kconfig
Following the menu:
menu "Device Drivers"
Please add
source "drivers/hello/Kconfig"
1.5.3 Modify drivers/Kconfig
make menuconfig
To enble the menu ‘Eric: First Android Driver‘in the " Device Drivers" item.
And save , then to build the linux kernel code.
2. 测试驱动以下是需要操作的目录在AOSP目录下
2.1 create the application on externel
在external下创建hello目录
目录下将有两个文件:hello.c and Android.mk
cd external
mkdir hello
vim hello.c
/ AOSP app : ./external/hello.c => /system/bin/hello/
Android.mk as follows:

LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE_TAGS := optional LOCAL_MODULE := hello LOCAL_SRC_FILES := $(call all-subdir-c-files) include $(BUILD_EXECUTABLE)

2.2 build the application
To build the hello application
mmm external/hello/
Add it into the system.img
make snod
2.3 Test/Debug the driver hello
Before flash, we can build the AOSP again, of cource, don‘t forget replace the linux kernel file ‘Image.gz-dtb‘.
After flash into the phone, reboot the phone, and then do follows: