在华为云上安装高可用 KubeSphere
随着多云多集群的场景越来越丰富，在各个云厂商环境部署 KubeSphere 的需求随之升高。由于各云厂商的云资源使用规则和菜单导航栏各不相同，会使用户花大量时间去排错。为降低部署过程错误率，本教程使用华为云平台部署一套高可用的 KubeSphere，希望可以帮助到大家提高部署体验。
一、部署前期准备
所需环境的资源满足以下条件即可：
| 华为云产品 | 数量 | 用途 | 备注 |
|---|---|---|---|
| ECS 云服务器 | 6 | master、node | |
| VPC | 1 | 可用区 | |
| ELB | 2 | 负载均衡 | |
| 安全组 | 1 | 出入口管控 | |
| 公网 IP | 7 | 外网访问 |
进入到华为云控制， 在左侧列表选择「虚拟私有云」， 选择「创建虚拟私有云」 创建 VPC，配置如下图：
文章图片
2.创建安全组
创建一个安全组，设置入方向的规则、关联实例参考如下：
文章图片
文章图片
文章图片
3.创建实例
【在华为云上安装高可用 KubeSphere】在网络配置中，网络选择第一步创建的 VPC 和子网。在安全组中，选择上一步创建的安全组。
文章图片
4.创建负载均衡器（创建内外两个）
内网 ELB：
文章图片
文章图片
文章图片
文章图片
外网 ELB：
若集群需要配置公网访问，则需要为外网负载均衡器配置一个公网 IP 为 所有节点 添加后端监听器，监听端口为 80（测试使用 30880 端口,此处 80 端口也需要在安全组中开放）。
文章图片
后面配置文件 config.yaml 需要配置在前面创建的 内网 SLB 分配的地址（VIP）
controlPlaneEndpoint:
domain: lb.kubesphere.local
address: "192.168.0.205"
port: "6443"部署 KubeSphere 平台 1.下载 KK
$ curl -sfL https://get-kk.kubesphere.io | VERSION=v1.1.1 sh -2.添加执行权限
$ chmod +x kk3.使用 kubekey 部署
$ ./kk create config --with-kubesphere v3.1.1 --with-kubernetes v1.17.9 -f master-HA.yaml4.集群配置调整
apiVersion: kubekey.kubesphere.io/v1alpha1
kind: Cluster
metadata:
name: master-HA
spec:
hosts:
- {name: master1, address: 192.168.1.10, internalAddress: 192.168.1.10, password: yourpassword} # Assume that the default port for SSH is 22, otherwise add the port number after the IP address as above
- {name: master2, address: 192.168.1.11, internalAddress: 192.168.1.11, password: yourpassword} # Assume that the default port for SSH is 22, otherwise add the port number after the IP address as above
- {name: master3, address: 192.168.1.12, internalAddress: 192.168.1.12, password: yourpassword} # Assume that the default port for SSH is 22, otherwise add the port number after the IP address as above
- {name: node1, address:192.168.1.13, internalAddress: 192.168.1.13, password: yourpassword} # Assume that the default port for SSH is 22, otherwise add the port number after the IP address as above
- {name: node2, address: 192.168.1.14, internalAddress: 192.168.1.14, password: yourpassword} # Assume that the default port for SSH is 22SSH is 22, otherwise add the port number after the IP address as above
- {name: node3, address: 192.168.1.15, internalAddress: 192.168.1.15, password: yourpassword} # Assume that the default port for SSH is 22, otherwise add the port number after the IP address as above
roleGroups:
etcd:
- master[1:3]
master:
- master[1:3]
worker:
- node[1:3]
controlPlaneEndpoint:
domain: lb.kubesphere.local
address: "192.168.1.8"
port: "6443"
kubernetes:
version: v1.17.9
imageRepo: kubesphere
clusterName: cluster.local
masqueradeAll: false# masqueradeAll tells kube-proxy to SNAT everything if using the pure iptables proxy mode. [Default: false]
maxPods: 110# maxPods is the number of pods that can run on this Kubelet. [Default: 110]
nodeCidrMaskSize: 24# internal network node size allocation. This is the size allocated to each node on your network. [Default: 24]
proxyMode: ipvs# mode specifies which proxy mode to use. [Default: ipvs]
network:
plugin: calico
calico:
ipipMode: Always# IPIP Mode to use for the IPv4 POOL created at start up. If set to a value other than Never, vxlanMode should be set to "Never". [Always | CrossSubnet | Never] [Default: Always]
vxlanMode: Never# VXLAN Mode to use for the IPv4 POOL created at start up. If set to a value other than Never, ipipMode should be set to "Never". [Always | CrossSubnet | Never] [Default: Never]
vethMTU: 1440# The maximum transmission unit (MTU) setting determines the largest packet size that can be transmitted through your network. [Default: 1440]
kubePodsCIDR: 10.233.64.0/18
kubeServiceCIDR: 10.233.0.0/18
registry:
registryMirrors: ["https://*.mirror.aliyuncs.com"] # # input your registryMirrors
insecureRegistries: []
privateRegistry: ""
storage:
defaultStorageClass: localVolume
localVolume:
storageClassName: local---
apiVersion: installer.kubesphere.io/v1alpha1
kind: ClusterConfiguration
metadata:
name: ks-installer
namespace: kubesphere-system
labels:
version: v3.1.1
spec:
local_registry: ""
persistence:
storageClass: ""
authentication:
jwtSecret: ""
etcd:
monitoring: true# Whether to install etcd monitoring dashboard
endpointIps: 192.168.1.10,192.168.1.11,192.168.1.12# etcd cluster endpointIps
port: 2379# etcd port
tlsEnable: true
common:
mysqlVolumeSize: 20Gi # MySQL PVC size
minioVolumeSize: 20Gi # Minio PVC size
etcdVolumeSize: 20Gi# etcd PVC size
openldapVolumeSize: 2Gi# openldap PVC size
redisVolumSize: 2Gi # Redis PVC size
es:# Storage backend for logging, tracing, events and auditing.
elasticsearchMasterReplicas: 1# total number of master nodes, it's not allowed to use even number
elasticsearchDataReplicas: 1# total number of data nodes
elasticsearchMasterVolumeSize: 4Gi# Volume size of Elasticsearch master nodes
elasticsearchDataVolumeSize: 20Gi# Volume size of Elasticsearch data nodes
logMaxAge: 7# Log retention time in built-in Elasticsearch, it is 7 days by default.
elkPrefix: logstash# The string making up index names. The index name will be formatted as ks--log
# externalElasticsearchUrl:
# externalElasticsearchPort:
console:
enableMultiLogin: false# enable/disable multiple sing on, it allows an account can be used by different users at the same time.
port: 30880
alerting:# Whether to install KubeSphere alerting system. It enables Users to customize alerting policies to send messages to receivers in time with different time intervals and alerting levels to choose from.
enabled: true
auditing:# Whether to install KubeSphere audit log system. It provides a security-relevant chronological set of records，recording the sequence of activities happened in platform, initiated by different tenants.
enabled: true
devops:# Whether to install KubeSphere DevOps System. It provides out-of-box CI/CD system based on Jenkins, and automated workflow tools including Source-to-Image & Binary-to-Image
enabled: true
jenkinsMemoryLim: 2Gi# Jenkins memory limit
jenkinsMemoryReq: 1500Mi# Jenkins memory request
jenkinsVolumeSize: 8Gi# Jenkins volume size
jenkinsJavaOpts_Xms: 512m# The following three fields are JVM parameters
jenkinsJavaOpts_Xmx: 512m
jenkinsJavaOpts_MaxRAM: 2g
events:# Whether to install KubeSphere events system. It provides a graphical web console for Kubernetes Events exporting, filtering and alerting in multi-tenant Kubernetes clusters.
enabled: true
logging:# Whether to install KubeSphere logging system. Flexible logging functions are provided for log query, collection and management in a unified console. Additional log collectors can be added, such as Elasticsearch, Kafka and Fluentd.
enabled: true
logsidecarReplicas: 2
metrics_server:# Whether to install metrics-server. IT enables HPA (Horizontal Pod Autoscaler).
enabled: true
monitoring:#
prometheusReplicas: 1# Prometheus replicas are responsible for monitoring different segments of data source and provide high availability as well.
prometheusMemoryRequest: 400Mi# Prometheus request memory
prometheusVolumeSize: 20Gi# Prometheus PVC size
alertmanagerReplicas: 1# AlertManager Replicas
multicluster:
clusterRole: none# host | member | none# You can install a solo cluster, or specify it as the role of host or member cluster
networkpolicy:# Network policies allow network isolation within the same cluster, which means firewalls can be set up between certain instances (Pods).
enabled: true
notification:# It supports notification management in multi-tenant Kubernetes clusters. It allows you to set AlertManager as its sender, and receivers include Email, Wechat Work, and Slack.
enabled: true
openpitrix:# Whether to install KubeSphere App Store. It provides an application store for Helm-based applications, and offer application lifecycle management
enabled: true
servicemesh:# Whether to install KubeSphere Service Mesh (Istio-based). It provides fine-grained traffic management, observability and tracing, and offer visualization for traffic topology
enabled: true 5.执行命令创建集群
# 指定配置文件创建集群
$ ./kk create cluster --with-kubesphere v3.1.1 -f master-HA.yaml# 查看 KubeSphere 安装日志-- 直到出现控制台的访问地址和登录帐户
$ kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l app=ks-install -o jsonpath='{.items[0].metadata.name}') -f#####################################################
###Welcome to KubeSphere!###
#####################################################Console: http://192.168.1.10:30880
Account: admin
Password: P@88w0rdNOTES：
1. After you log into the console, please check the
monitoring status of service components in
the "Cluster Management". If any service is not
ready, please wait patiently until all components
are up and running.
2. Please change the default password after login.#####################################################
https://kubesphere.io2020-08-28 01:25:54
#####################################################访问公网 IP + Port 为部署后的使用情况，使用默认帐户密码 (admin/P@88w0rd)，文章组件安装为最大化，登录点击平台管理>集群管理可看到下图安装组件列表和机器情况。在集群概述页面中，可以看到如下图所示的仪表板。
文章图片
本文由博客一文多发平台 OpenWrite 发布！
