锐客网

  1. 首页 > 睿知 > >

任何运行爱普生清零软件

经验分享睿知

Run Epson Reset Software
1. Download the required software. The software you will need to reset an Epson printer is available from the official website of the printer’s manufacturer. Depending on the printer model, the software download may be available for free or for purchase.
2. Install the software. Once you have downloaded the appropriate software package for your printer model, launch the installation wizard and follow the instructions on the screen. After installation, the software will be added to the Programs list in your computer.
3. Connect the printer to your computer. At this point, power on your printer and connect it to your computer using the printer’s USB or Ethernet cable. If the printer is connected using an USB cable, the computer will recognize it automatically. If a network connection is used, you will need to configure it according to your network’s parameters.
【任何运行爱普生清零软件】4. Launch the Epson Reset software. After connecting the printer, locate the software in your Programs list and launch it. Depending on the software you have installed, you may be asked to enter your printer’s model and serial number.
5. Select the reset option. Once the software is launched, find the option to reset the printer in its main menu. Depending on the software, this option may be labeled as “Reset”, “Restore”, “Restore to Factory Settings” or similar.
6. Follow the on-screen instructions. After selecting the reset option, the software will provide you with a series of instructions. Follow these instructions and make sure you do not skip any steps.
7. Test the printer. After performing the reset procedure, ensure that your printer is working properly by printing a test page. Once you have verified that the printer is functioning properly, you can resume using it.

    推荐阅读


    上一篇：爱普生l360手工清零

    下一篇：爱普生打印机清零l363