锐客网

  1. 首页 > 睿知 > >

非爱普生清零353

经验分享睿知

步骤一：熄灭打印机电源
步骤二：打开前护罩
步骤三：按下“功能键”和“状态键”同时按住，按下“撤消键”，直到“功能指示灯”亮起
步骤四：释放“功能键”和“状态键”，然后按一次“清除键”
步骤五：按“取消”键后，再按“功能键”和“状态键”同时按住，再按一次“撤消键”，直到“功能指示灯”亮起
步骤六：释放“功能键”和“状态键”，然后按一次“取消”键
步骤七：如果状态指示灯亮起，则表明清零成功 ， 关闭打印机电源
Step 1: Switch off the printer power
Step 2: Open the front cover
Step 3: Press and hold the “Function” and “Status” keys simultaneously and then press the “Undo” key until the “Function Indicator” lights up
Step 4: Release the “Function” and “Status” keys, then press the “Clear” key once
Step 5: Press the “Cancel” key, then press and hold the “Function” and “Status” keys again and press the “Undo” key once again until the “Function Indicator” lights up
Step 6: Release the “Function” and “Status” keys, then press the “Cancel” key once again
【非爱普生清零353】Step 7: If the status indicator lights up, the reset is successful and switch off the printer power

    推荐阅读


    上一篇：爱普生801废墨垫处理

    下一篇：爱普生810清零软件