锐客网

  1. 首页 > 睿知 > >

爱普生m101清零

经验分享睿知

EPSON M101 Printer Reset Procedure
1. Check the power switch on the printer and make sure it is in the “OFF” position.
2. Disconnect the power cord from the back of the printer.
3. Unplug the power cord from the wall outlet.
4. Push the “Reset” button once and hold it down for approximately five seconds.
5. Reconnect the power cord to the back of the printer, and then plug the power cord into the wall outlet.
6. Turn on the power switch on the printer and make sure it is in the “ON” position.
7. After the printer has powered up, open the printer’s cover and wait for the LED to light up.
【爱普生m101清零】8. Press the “Reset” button once, and then close the cover.
9. The printer should now be reset back to factory defaults and ready to use.
Congratulations! You have now successfully reset your Epson M101 printer. If you have any problems with the printer, please contact Epson Technical Support.

    推荐阅读


    上一篇：爱普生l301废墨垫清零软件

    下一篇：爱普生l201废墨清零id