锐客网

  1. 首页 > 生活百科 > >

爱普生r330墨盒清零英文

经验分享生活百科

Introduction
Epson R330 inkjet printers are a great choice for budget-minded consumers who are looking for high-quality prints, without sacrificing on features. But like all printers, they need to be serviced, and eventually, the ink cartridges need to be reset. Resetting the ink cartridges involves a few steps and resetting the Epson R330 printer is no exception. Here’s how to reset your Epson R330 printer’s ink cartridge.
Step 1: Turn off your Epson R330 printer. Make sure that all the cables are properly connected and that the printer is properly powered off.
【爱普生r330墨盒清零英文】Step 2: Open the Epson R330 printer control panel and select “Printer Setup”. Next, click on “Reset” and then click on “Reset Ink Cartridge”.
Step 3: Press and hold the “Ink” button for about 5 seconds. You will hear a beep after the 5 seconds have elapsed and the printer will reset the ink cartridges.
Step 4: Now you will need to check the printer’s settings to make sure that the ink cartridges have been reset. Select “Printer Setup” and then check the “Cartridge Settings”. Here, you should see that the cartridges are now reset and that the ink level is back to full.
Step 5: Print a test page to make sure the printer is functioning properly.
Conclusion
Resetting your Epson R330 printer’s ink cartridge is a relatively simple task that requires following a few steps. If you get stuck during any of the steps, don’t hesitate to contact an Epson technician or consult the Instructional Manual that came with your printer. With a little patience and careful troubleshooting, you should be able to reset your Epson R330 printer’s ink cartridge easily and quickly.

    推荐阅读


    上一篇：测速管家安卓,网速测试稳定后会提示你当前测试结果

    下一篇：爱普生固件升级失败怎么办