锐客网

  1. 首页 > 睿知 > >

爱普生L353收集垫清零

经验分享睿知

Pull the power cord and paper output tray out of the Epson L355 printer to make sure it’s powered off and to avoid any unexpected paper jams.
Next, open the printer cover by releasing the side latches, and carefully slide the print head to the center.
To reset the counter, locate the small hole on the right side of the printer near the bottom. Take a small pin (like a paper clip) and insert it into this hole. The printer should beep and you should see a green LED light on the front panel near the top of the printer.
Now, move the print head back to its original position, close the printer cover, and reconnect the power cord and paper output tray.
Turn the printer on by pressing the power button. The green LED should now be blinking and you should see a message on the display saying “Press the paper button to start resetting the counter”.
Press the paper button twice and the counter should now be reset. You should see a message on the display saying “Counter reset completed”. The green LED will then stop blinking and the printer is ready to use.
【爱普生L353收集垫清零】To test that the reset was successful, run a nozzle check from the maintenance tab in the printer settings. The color and black bars should be present and even, indicating a successful reset.
If the nozzle check is not successful, repeat the reset process. If it still fails, contact your printer manufacturer.
In summary, resetting the counter on an Epson L355 printer is a simple process that can be done in a few minutes. By carefully following the steps above, you can reset the counter on your Epson L355 printer and get it working again in no time.

    推荐阅读


    上一篇：爱普生r230中文清零

    下一篇：爱普生me10清零 通讯错误