爱普生2521手动清零

Epson 2521 manual reset is a process by which one can reset the Epson 2521 printer without having to reset the entire computer or system. This is done by pressing a special combination of buttons on the printer to reset the printer’s internal settings.
First, turn off the power of the printer. Then, press and hold the power button while simultaneously pressing the load/eject button. Hold down both buttons for at least 5 seconds, then release both buttons.
【爱普生2521手动清零】The printer will beep and the display will turn on. At this point, the power light will turn on and the Ready/Data light will blink. Message will also appear saying “Initiating reset”.
Press the Load/Eject button again to continue the reset process. At this point, the printer will enter the self-diagnostic mode. During this mode, the printer will print a report of the current settings and print a test page. Once the test page has been printed and the printer has finished its self-diagnostic mode, the printer will return to its ready state.
At this point, the printer will be reset to its default settings. You can then configure the printer however you prefer. Note that in some cases, the printer may not reset properly and you may need to repeat this process to reset the printer.
By following the steps above, you can manually reset the Epson 2521 printer quickly and easily. With the reset complete, you can then configure the printer to your desired settings and preferences.

    推荐阅读