锐客网

  1. 首页 > 睿知 > >

爱普生l360废墨垫手动清零

经验分享睿知

【爱普生l360废墨垫手动清零】Epson L360 Waste Ink Pad Reset Procedure
1. Start by downloading the Epson L360 software resetter from the internet and save it on your computer.
2. After downloading the software, double click the *.exe file to start installation.
3. Once installation is complete, open the program and select the printer model you wish to reset.
4. Click the ‘Reset Waste Ink Pad Counter’ button. A warning message will be displayed. Click OK to proceed.
5. The software will automatically detect the printer model and begin the reset process.
6. When the reset process is complete, a message will be displayed indicating that the Waste Ink Pad Counter has been reset.
7. Click ‘Finish’ to close the software and complete the reset process.
8. Open the printer access door and locate the Waste Ink Pad. It should be located on the right side of the printer.
9. Open the Waste Ink Pad and remove any dried ink or dirt from the surface.
10. With a damp cloth, clean the surface of the Waste Ink Pad until its clean and dry.
11. Reinstall the Waste Ink Pad and close the access door.
12. Power on the printer and print a test page to ensure the printer is working properly.
13. The Waste Ink Pad reset is now complete.

    推荐阅读


    上一篇：爱普生L455打印机废墨清零图片

    下一篇：爱普生l800没法清零