锐客网

  1. 首页 > 睿知 > >

佳能1980废墨清零

经验分享睿知

加拿大
Canon 1980 Waste Ink Reset 70
Canon 1980 is a laser printer that was released in the 1980s. It was a popular model due to its high quality output and reliability. While this printer was built to last, it was eventually rendered obsolete by newer models. As a result, it’s no longer being produced and many parts are no longer available.
Fortunately, the Canon 1980 can still be used with a bit of ingenuity. The most common issue with this printer is its inability to reset the waste ink counter. This can lead to blockages in the ink system and poor print quality. The traditional fix is to either purchase a replacement waste ink tank or send the printer away for repairs – both of which can be expensive.
Fortunately, there is another solution – a Canon 1980 waste ink reset. This procedure involves resetting the waste ink counter, allowing the printer to continue functioning normally. There is no need to purchase a replacement tank or pay for repairs.
The waste ink reset procedure is relatively simple and can be done at home with a few basic tools. First, locate the waste ink tube. It should be located at the back of the printer, near the power supply. Disconnect the tube and unscrew the cap. Carefully remove the plastic plug, then replace it with a new one. This can be done using a piece of wire or string.
Once the new plug is in place, carefully re-insert the waste ink tube and cap. Plug the power supply back in and turn the printer on. The waste ink counter should now be reset and the printer should operate normally.
【佳能1980废墨清零】With a little ingenuity, the Canon 1980 can continue to be used for years to come. By following the waste ink reset procedure, users can avoid the expense and inconveniences of having to replace the ink tank or send the printer away for repairs.

    推荐阅读


    上一篇：佳能8780更换废墨垫

    下一篇：佳能ts9120废墨仓在哪