Canon error 5B00 requires resetting the printer to clear the error. The error code is an indication of a Waste Ink Absorber Full error. This is a counter inside the printer and when The Absorber is full it will display this error and shut off the printer.
Step 1 – Disconnect the power cable from the printer.
Step 2 -Open the printer cover, where you should see the cartridges.
【佳能错误5b00清零键】Step 3 -Locate the small square black box on the rigth side of the printer, this is the Waste ink tank.
Step 4 -Press and hold the “Power On/Off” button while keeping the “Resume/Cancel” button depressed.
Step 5 -While still holding both buttons turn on the printer.
Step 6 -Press the “Resume/Cancel” button two times and then the power button one last time.
Step 7 -Close the printer cover.
Step 8 -Connect the power cable back to the printer and turn it on. The error should be cleared.
If the error persists then you may need to replace the Ink Absorber.
推荐阅读
- 佳能618提示5b02
- 佳能打印机清零不了
- 佳能g2800废墨怎样抽出来
- 佳能g1810废墨垫手动清零
- 5b02 378
- 博客服务器 博克服务器怎么连接
- 佳能mf4450废墨仓
- 佳能mg7580 废墨
- 如何分析业务