宝剑锋从磨砺出,梅花香自苦寒来。这篇文章主要讲述[RK3288][Android6.0] 调试笔记 --- 系统识别不同硬件版本方法相关的知识,希望能为你提供帮助。
本文转载自:http://m.blog.csdn.net/kris_fei/article/details/70226451
【[RK3288][Android6.0] 调试笔记 --- 系统识别不同硬件版本方法】Platform: Rockchip
OS: android 6.0
Kernel: 3.10.92
需求:
硬件版本不一样,通过几个gpio的高低电平来表示不同版本,
u-boot/kernel/hal/framework/app层都需要用到,那么
可以使用系统自身的参数传递机制以及property API来实现.
以一个gpio为例.
改动:
u-boot
diff --git a/board/rockchip/rk32xx/rk32xx.c b/board/rockchip/rk32xx/rk32xx.c
index f043f77..e9a7466 100644
--- a/board/rockchip/rk32xx/rk32xx.c
+++ b/board/rockchip/rk32xx/rk32xx.c
@@ -164,6 +164,12 @@ static void board_init_adjust_env(void)
}
}
//宏定义包起来
+/*Kris,161219, hw version verify. {*/
+#ifdef CONFIG_ECO_HW_REV
+u8 eco_hw_rev = 0;
+#endif
+/*Kris,161219, hw version verify. }*/
+
#ifdef CONFIG_BOARD_LATE_INIT
extern char bootloader_ver[24];
int board_late_init(void)
@@ -182,6 +188,15 @@ int board_late_init(void)
key_init();
#endif
+/*Kris,161219, hw version verify. {*/
+#ifdef CONFIG_ECO_HW_REV
+#define GPIO_ECO_HW_REV
(GPIO_BANK8 | GPIO_A7)
//获取gpio状态
+
gpio_direction_input(GPIO_ECO_HW_REV);
+
eco_hw_rev = gpio_get_value(GPIO_ECO_HW_REV);
+
printf("HW board check version:%d\n", gpio_get_value(GPIO_ECO_HW_REV));
+#endif
+/*Kris,161219, hw version verify. }*/
+
#ifdef CONFIG_RK_POWER
debug("pmic_init\n");
pmic_init(0);
diff --git a/common/cmd_bootrk.c b/common/cmd_bootrk.c
index 17ad496..9f101c6 100755
--- a/common/cmd_bootrk.c
+++ b/common/cmd_bootrk.c
@@ -42,6 +42,14 @@ extern int do_bootm_linux(int flag, int argc, char *argv[],
#if defined(CONFIG_POWER_RK818)
extern bool is_rk81x_fg_init(void);
#endif
+
+/*Kris,161219, hw version verify. {*/
+#ifdef CONFIG_ECO_HW_REV
+extern u8 eco_hw_rev;
+#endif
+/*Kris,161219, hw version verify. }*/
+
+
extern int rkimage_load_image(rk_boot_img_hdr *hdr,
const disk_partition_t *boot_ptn, const disk_partition_t *kernel_ptn);
@@ -486,6 +494,13 @@ static void rk_commandline_setenv(const char *boot_name, rk_boot_img_hdr *hdr, b
"%s adc.incre=%d", command_line, g_increment);
#endif
+/*Kris,161219, hw version verify. {*/
+#ifdef CONFIG_ECO_HW_REV
//利用u-boot到kernel的cmdline参数传递机制,传到kernel中.
+snprintf(command_line, sizeof(command_line),
+
"%s androidboot.eco_hw_rev=%s", command_line, eco_hw_rev?"Primary":"Secondary");
+#endif
+/*Kris,161219, hw version verify. }*/
+
char *sn = getenv("fbt_sn#");
if (sn != NULL) {
/* append serial number if it wasn‘t in device_info already */
diff --git a/include/configs/rk32plat.h b/include/configs/rk32plat.h
index f80799f..ec5e41d 100755
--- a/include/configs/rk32plat.h
+++ b/include/configs/rk32plat.h
@@ -224,4 +224,8 @@
#endif /* CONFIG_RK_POWER */
+
+/*Kris,161219, hw version verify.*/
+#define CONFIG_ECO_HW_REV
+
#endif /* __RK32PLAT_CONFIG_H */
kernel:
diff --git a/arch/arm/mach-rockchip/common.c b/arch/arm/mach-rockchip/common.c
index e80880e..107b58c 100755
--- a/arch/arm/mach-rockchip/common.c
+++ b/arch/arm/mach-rockchip/common.c
@@ -340,6 +340,21 @@ static int __init rockchip_uboot_logo_setup(char *p)
}
early_param("uboot_logo", rockchip_uboot_logo_setup);
+/*Kris, 20161219, add check hw rev interface. {*/
//kernel中可以使用eco_hw_rev来判断了.
+int eco_hw_rev;
+static int __init early_eco_hw_rev(char *p)
+{
+
get_option(&
p, &
eco_hw_rev);
+
if (!strncmp(p, "Primary", 7))
+
eco_hw_rev = 1;
+
else if (!strncmp(p, "Secondary", 9))
+
eco_hw_rev = 0;
+
printk("androidboot.eco_hw_rev:%s\n", p);
+
return 0;
+}
+early_param("androidboot.eco_hw_rev", early_eco_hw_rev);
+/*Kris, 20161219, add check hw rev interface. }*/
+
userspace:
注意到cmdline的参数是androidboot.eco_hw_rev, ,在init进程中会解析以androidboot打头的cmdline参数,
可参考:
http://blog.csdn.net/kris_fei/article/details/50925356
最终生成ro.boot.xxx格式的property. 而在HAL, Natvie, APP层都有对应的api去解析property,这样整个系统都可以使用了.
推荐阅读
- JAVA_JNI字段描述符“([Ljava/lang/String;)V”(Android)
- 解决 Cordova 打包 vue项目为 APP 后,在安卓平台下 touchMove 事件不生效的问题
- 2 Interrupting Appropriately
- linux 安装沙盒virtualenv virtualenvwrapper
- android 超简单的拖动按钮 悬浮按钮 吸附按钮 浮动按钮
- 华为荣耀立方价格多少钱?荣耀立方价格
- 荣耀立方上市时间啥时候?华为荣耀立方啥时候上市?
- oppo自动选择手环价格多少钱?oppo自动选择手环o-band价格
- o-band啥时候上市?o-band自动选择手环上市时间