Android Wifi 主动扫描被动扫描 _Android

亦余心之所善兮，虽九死其犹未悔。这篇文章主要讲述Android Wifi 主动扫描被动扫描相关的知识，希望能为你提供帮助。
记录一下高通wifi kernel主动扫描，被动扫描的处理流程。介绍主动扫描，被动扫描以及连接的wifi的扫描过程
参考文档
《802.11无线网络权威指南》
《80_Y0513_1_QCA_WCN36X0_SOFTWARE_ARCHITECTURE.pdf》(高通文档)
被动扫描（passive scanning）
可以节省电池的电力，因为不需要传送任何信号。在被动
扫描中，工作站会在频道表（channel list）所列的各个频道之间不断切换，并静候Beacon 帧
的到来。所收到的任何帧都会被暂存起来，以便取出传送这些帧之BSS 的相关数据。
作被动扫描的过程中，工作站会在频道间不断切换，并且会记录来自所收到之Beacon 信息
的信息。Beacon 在设计上是为了让工作站得知，加入某个基本服务组合（basic service set，
简称BSS）所需要的参数，以便进行通讯。
主动扫描（active scanning）
在主动扫描中，工作站扮演比较积极的角色。在每个频道上，工作站
都会岭出Probe Request 帧，请求某个特定网络予以回应。主动扫描系主动试图寻找网络，而不
是听候网络宣告本身的存在。使用主动扫描的工作站将会以如下的程序扫描频道表所列的频道：
1.跳至某个频道，然后等候来讯显示，或者等到ProbeDelay 计时器逾时。如果在这个频道收得到帧，就证明该频道有人使用，因此可以加以探
测。此计时器用来防止某个闲置频道让整个程序停摆；工作站不会一直听候帧到来。
2.利用基本的DCF 访问程序取得介质使用权，然后送出一个Probe Request 帧。
3.至少等候一段最短的频道时间（即MinChannelTime）。
a.如果介质并不忙碌，表示没有网络存在。因此可以跳至下个频道。
b.如果在MinChannelTime 这段期间介质非常忙碌，就继续等候一段时间，直到
最长的频道时间（即MaxChannelTime），然后处理任何的Probe Response 帧。
当网络收到搜寻其所属之延伸服务组合的Probe Request（探查要求），就会发出Probe
Response（探查回应）帧。为了在舞会中找到朋友，各位或许会绕著舞池大声叫喊对方的名字。
（虽然这并不礼貌，不过如果真想找到朋友，大概没有其他选择。）如果对方听见了，她就会出
声回应，至于其他人根本就不会理你（希望如此）。Probe Request 框的作用类似，不过在Probe
Request 帧当中可以使用broadcast SSID，如此一来，该区所有的802.11 网络都会以Probe
Response 加以回应。
probe request两种情况的不同指定SSID

文章图片

SSID为空(broadcast)【Android Wifi 主动扫描被动扫描】

文章图片

kernel扫描日志
主动扫描

18:49:39.864678[18:49:39.858008] [00000016B70D009C] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 18:49:39.864704[18:49:39.858079] [00000016B70D05E4] [VosMC] wlan: [I :PE ] limContinuePostChannelScan: 477:Mac Addr da:a1:19:53:b9:f8 used in sending ProbeReq number 0, for SSIDon channel: 2 18:49:39.864726[18:49:39.858146] [00000016B70D0AEA] [VosMC] wlan: [I :VOS] VPKT [779]: [0000000000000000] Packet allocated, type 0[TX_802_11_MGMT] 18:49:39.864748[18:49:39.858193] [00000016B70D0E76] [VosMC] wlan: [IH:WDA] Tx Mgmt Frame Subtype: 4 alloc(0000000000000000) txBdToken = 0 18:49:39.864770[18:49:39.858221] [00000016B70D108F] [VosMC] wlan: [I :TL ] TL: using self sta addr to get staidx for spoofed probe req 00:0a:f5:32:b1:50 18:49:39.864792[18:49:39.858237] [00000016B70D11BE] [VosMC] wlan: [IL:TL ] WLAN TL: fProtMgmtFrame:0 18:49:39.864814[18:49:39.858256] [00000016B70D132A] [VosMC] wlan: [IL:TL ] WLAN TL: Dump TX meta info: txFlags:2, qosEnabled:0, ac:0, isEapol:0, fdisableFrmXlt:1, frmType:0 18:49:39.864836[18:49:39.858269] [00000016B70D142E] [VosMC] wlan: [IH:TL ] Serializing WDA TX Start Xmit event 18:49:39.866943[18:49:39.858720] [00000016B70D360E] [VosTX] wlan: [I :VOS] VosTXThread: Servicing the VOS TL TX Message queue 18:49:39.866992[18:49:39.858916] [00000016B70D44B8] [VosTX] wlan: [I :WDI] WDTS_TxPacketComplete: Management frame Tx complete status: 0 18:49:39.867015[18:49:39.858934] [00000016B70D4604] [VosTX] wlan: [I :WDA] Enter:WDA_TxComplete 18:49:39.867037[18:49:39.858955] [00000016B70D4795] [VosTX] wlan: [I :VOS] VPKT [1428]: [0000000000000000] Packet returned, type 0[TX_802_11_MGMT] 18:49:39.867059[18:49:39.859423] [00000016B70D6AB7] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer MIN CHANNEL TIMEOUT 18:49:39.867098[18:49:39.859437] [00000016B70D6BBD] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 18:49:39.867120[18:49:39.859450] [00000016B70D6CBE] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 18:49:39.867141[18:49:39.859466] [00000016B70D6DEF] [VosMC] wlan: [I :SYS] Timer MIN CHANNEL TIMEOUT being activated 18:49:39.867180[18:49:39.859478] [00000016B70D6EDD] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 18:49:39.867201[18:49:39.859497] [00000016B70D7048] [VosMC] wlan: [I :SYS] Timer MIN CHANNEL TIMEOUT now activated 18:49:39.867240[18:49:39.859509] [00000016B70D7124] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer MAX CHANNEL TIMEOUT 18:49:39.867279[18:49:39.859520] [00000016B70D7202] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 18:49:39.867301[18:49:39.859532] [00000016B70D72E9] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 18:49:39.867323[18:49:39.859543] [00000016B70D73BF] [VosMC] wlan: [I :SYS] Timer MAX CHANNEL TIMEOUT being activated 18:49:39.867362[18:49:39.859554] [00000016B70D748A] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 18:49:39.867405[18:49:39.859567] [00000016B70D757E] [VosMC] wlan: [I :SYS] Timer MAX CHANNEL TIMEOUT now activated 18:49:39.867446[18:49:39.859578] [00000016B70D765B] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer Periodic Probe Request Timer 18:49:39.867485[18:49:39.859589] [00000016B70D7731] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 18:49:39.867506[18:49:39.859601] [00000016B70D7816] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 18:49:39.867528[18:49:39.859614] [00000016B70D7903] [VosMC] wlan: [I :SYS] Timer Periodic Probe Request Timer being activated// 扫描请求定时器 18:49:39.867566[18:49:39.859624] [00000016B70D79C9] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 18:49:39.867587[18:49:39.859638] [00000016B70D7AD6] [VosMC] wlan: [I :SYS] Timer Periodic Probe Request Timer now activated 18:49:39.867626[18:49:39.861202] [00000016B70DF068] [cnss_] wlan: [I :HDD] __wlan_hdd_cfg80211_get_wifi_info: 6759: Rcvd req for FW version FW version is CNSS-PR-4-0-509-158621-1 18:49:39.867647[18:49:39.861722] [00000016B70E1739] [swapp] wlan: [I :VOS] TIMER callback: running on MC thread 18:49:39.867668[18:49:39.861831] [00000016B70E1F55] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS SYS MC Message queue 18:49:39.867689[18:49:39.861850] [00000016B70E20B7] [VosMC] wlan: [I :SYS] Timer Periodic Probe Request Timer triggered// 超时处理 18:49:39.867711[18:49:39.861874] [00000016B70E2291] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 18:49:39.867733[18:49:39.861917] [00000016B70E25C3] [VosMC] wlan: [I :PE ] limProcessPeriodicProbeReqTimer: 4237: Mac Addr used in Probe Req is :da:a1:19:53:b9:f8 18:49:39.867755[18:49:39.861994] [00000016B70E2B8E] [VosMC] wlan: [I :VOS] VPKT [779]: [0000000000000000] Packet allocated, type 0[TX_802_11_MGMT] 18:49:39.867776[18:49:39.862042] [00000016B70E2F1F] [VosMC] wlan: [IH:WDA] Tx Mgmt Frame Subtype: 4 alloc(0000000000000000) txBdToken = 0 18:49:39.867799[18:49:39.862070] [00000016B70E3141] [VosMC] wlan: [I :TL ] TL: using self sta addr to get staidx for spoofed probe req 00:0a:f5:32:b1:50 18:49:39.867820[18:49:39.862086] [00000016B70E3278] [VosMC] wlan: [IL:TL ] WLAN TL: fProtMgmtFrame:0 18:49:39.867842[18:49:39.862105] [00000016B70E33DB] [VosMC] wlan: [IL:TL ] WLAN TL: Dump TX meta info: txFlags:2, qosEnabled:0, ac:0, isEapol:0, fdisableFrmXlt:1, frmType:0 18:49:39.867863[18:49:39.862118] [00000016B70E34DB] [VosMC] wlan: [IH:TL ] Serializing WDA TX Start Xmit event 18:49:39.867884[18:49:39.862200] [00000016B70E3AFD] [VosTX] wlan: [I :VOS] VosTXThread: Servicing the VOS TL TX Message queue 18:49:39.875713[18:49:39.862463] [00000016B70E4EBF] [VosTX] wlan: [I :WDI] WDTS_TxPacketComplete: Management frame Tx complete status: 0 18:49:39.875783[18:49:39.862521] [00000016B70E5313] [VosTX] wlan: [I :WDA] Enter:WDA_TxComplete 18:49:39.875807[18:49:39.862545] [00000016B70E54D5] [VosTX] wlan: [I :VOS] VPKT [1428]: [0000000000000000] Packet returned, type 0[TX_802_11_MGMT] 18:49:39.875829[18:49:39.863277] [00000016B70E8BD9] [VosMC] wlan: [I :SYS] Timer Periodic Probe Request Timer being activated 18:49:39.875868[18:49:39.863295] [00000016B70E8D1A] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 18:49:39.875890[18:49:39.863315] [00000016B70E8E94] [VosMC] wlan: [I :SYS] Timer Periodic Probe Request Timer now activated 18:49:39.875929[18:49:39.863568] [00000016B70EA19D] [VosRX] wlan: [I :VOS] VPKT [779]: [0000000000000000] Packet allocated, type 3[RX_RAW] 18:49:39.875951[18:49:39.864074] [00000016B70EC78E] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 18:49:39.875974[18:49:39.864119] [00000016B70ECAE9] [VosMC] wlan: [I :PE ] limHandle80211Frames: 821: RX MGMT - Type 0, SubType 5,Seq.no 1927, Source mac-addr a0:04:60:8e:cf:8b

被动扫描

13:51:17.028054[13:51:16.916323] [0000000114D926EF] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 13:51:17.028076[13:51:16.916373] [0000000114D92AC0] [VosMC] wlan: [I :PE ] limContinueChannelScan: 1390: Current Channel to be scanned is 64 13:51:17.028099[13:51:16.916372] [0000000114D92AB3] [cnss_] wlan: [I :HDD] __wlan_hdd_cfg80211_get_wifi_info: 6759: Rcvd req for FW version FW version is CNSS-PR-4-0-509-158621-1 13:51:17.028122[13:51:16.916407] [0000000114D92D3D] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS WDA MC Message queue 13:51:17.028144[13:51:16.916423] [0000000114D92E71] [VosMC] wlan: [IL:WDA] =========> WDA_McProcessMsg msgType: 1037 13:51:17.029844[13:51:16.916450] [0000000114D93077] [VosMC] wlan: [I :WDA] ------> WDA_ProcessStartScanReq 13:51:17.029880[13:51:16.916557] [0000000114D9387D] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 13:51:17.029903[13:51:16.923382] [0000000114DB38AE] [swapp] wlan: [I :VOS] TIMER callback: running on MC thread 13:51:17.029926[13:51:16.923894] [0000000114DB5ECB] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS SYS MC Message queue 13:51:17.029971[13:51:16.923929] [0000000114DB6168] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 13:51:17.029996[13:51:16.927976] [0000000114DC9127] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 13:51:17.030018[13:51:16.928019] [0000000114DC9431] [VosMC] wlan: [I :WDA] < ------ WDA_StartScanReqCallback 13:51:17.030040[13:51:16.928112] [0000000114DC9B29] [VosMC] wlan: [IH:VOS] vos_list_remove_front: list empty 13:51:17.030062[13:51:16.928147] [0000000114DC9DC0] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 13:51:17.030085[13:51:16.928207] [0000000114DCA240] [VosMC] wlan: [I :PE ] limContinuePostChannelScan: 575: START PASSIVE Scan chan 64 13:51:17.030107[13:51:16.928220] [0000000114DCA339] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer MAX CHANNEL TIMEOUT 13:51:17.030148[13:51:16.928232] [0000000114DCA41D] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 13:51:17.030170[13:51:16.928244] [0000000114DCA50A] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 13:51:17.030193[13:51:16.928261] [0000000114DCA65A] [VosMC] wlan: [I :SYS] Timer MAX CHANNEL TIMEOUT being activated 13:51:17.030233[13:51:16.928273] [0000000114DCA73C] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 13:51:17.030256[13:51:16.928295] [0000000114DCA8DF] [VosMC] wlan: [I :SYS] Timer MAX CHANNEL TIMEOUT now activated 13:51:17.030296[13:51:16.973733] [0000000114E9F8F8] [swapp] wlan: [I :VOS] TIMER callback: running on MC thread 13:51:17.030318[13:51:16.974113] [0000000114EA154D] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS SYS MC Message queue 13:51:17.030341[13:51:16.974148] [0000000114EA17D1] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 13:51:17.061520[13:51:17.024632] [0000000114F8E270] [swapp] wlan: [I :VOS] TIMER callback: running on MC thread 13:51:17.061598[13:51:17.024869] [0000000114F8F3E7] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS SYS MC Message queue 13:51:17.061623[13:51:17.024903] [0000000114F8F67C] [VosMC] wlan: [IH:VOS] Timer Addr inside voss_start : 0x0000000000000000 13:51:17.061647[13:51:17.026933] [0000000114F98F03] [cnss_] wlan: [I :HDD] __wlan_hdd_cfg80211_get_wifi_info: 6759: Rcvd req for FW version FW version is CNSS-PR-4-0-509-158621-1 13:51:17.061671[13:51:17.033122] [0000000114FB5F31] [swapp] wlan: [I :VOS] TIMER callback: running on MC thread 13:51:17.061694[13:51:17.033292] [0000000114FB6BA3] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS SYS MC Message queue 13:51:17.061716[13:51:17.033311] [0000000114FB6D0E] [VosMC] wlan: [I :SYS] Timer MAX CHANNEL TIMEOUT triggered 13:51:17.061739[13:51:17.033337] [0000000114FB6F05] [VosMC] wlan: [I :VOS] VosMCThread: Servicing the VOS PE MC Message queue 13:51:17.061762[13:51:17.033368] [0000000114FB714E] [VosMC] wlan: [I :PE ] limProcessMaxChannelTimeout: 4127: Scanning : Max channel timed out 13:51:17.061784[13:51:17.033382] [0000000114FB7262] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer MAX CHANNEL TIMEOUT 13:51:17.061825[13:51:17.033399] [0000000114FB73AE] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 13:51:17.061846[13:51:17.033412] [0000000114FB749F] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 13:51:17.061869[13:51:17.033427] [0000000114FB75C9] [VosMC] wlan: [I :SYS] tx_timer_deactivate() called for timer Periodic Probe Request Timer 13:51:17.061909[13:51:17.033438] [0000000114FB769F] [VosMC] wlan: [IH:VOS] vos_timer_stop: Timer Addr inside voss_stop : 0x0000000000000000 13:51:17.061931[13:51:17.033450] [0000000114FB7783] [VosMC] wlan: [IH:VOS] vos_timer_stop: Cannot stop timer in state = 19 13:51:17.061955[13:51:17.033468] [0000000114FB78D4] [VosMC] wlan: [W :PE ] limProcessMaxChannelTimeout: 4154: Sending End Scan req from MAX_CH_TIMEOUT in state 2 on ch-64

kernel代码分析

驱动模块初始化函数 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\HDD\\src\\wlan_hdd_main.c static int hdd_driver_init( void)vendor\\qcom\\opensource\\wlan\\qcacld-2.0\\CORE\\HDD\\src\\wlan_hdd_main.c int hdd_wlan_startup(struct device *dev, v_VOID_t *hif_sc) status = vos_open( & pVosContext, 0); vendor\\qcom\\opensource\\wlan\\prima\\CORE\\VOSS\\src\\vos_api.c VOS_STATUS vos_open( v_CONTEXT_t *pVosContext, void *devHandle )其中开启线程 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\VOSS\\src\\vos_sched.c VOS_STATUS vos_sched_open() { // 创建线程 //Create the VOSS Main Controller thread pSchedContext-> McThread = kthread_create(VosMCThread, pSchedContext, "VosMCThread"); }// 线程函数 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmReqMessages.c static int VosMCThread ( void * Arg ) {set_user_nice(current, -2); while(!shutdown) { // This implements the execution model algorithm retWaitStatus = wait_event_interruptible(pSchedContext-> mcWaitQueue, test_bit(MC_POST_EVENT, & pSchedContext-> mcEventFlag) || test_bit(MC_SUSPEND_EVENT, & pSchedContext-> mcEventFlag)); if(retWaitStatus == -ERESTARTSYS) { VOS_TRACE(VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_ERROR, "%s: wait_event_interruptible returned -ERESTARTSYS", __func__); break; } clear_bit(MC_POST_EVENT, & pSchedContext-> mcEventFlag); // 循环 while(1) { // Check if MC needs to shutdown if(test_bit(MC_SHUTDOWN_EVENT, & pSchedContext-> mcEventFlag)) { VOS_TRACE(VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_INFO, "%s: MC thread signaled to shutdown", __func__); shutdown = VOS_TRUE; /* Check for any Suspend Indication */ if (test_and_clear_bit(MC_SUSPEND_EVENT, & pSchedContext-> mcEventFlag)) { /* Unblock anyone waiting on suspend */ complete(& pHddCtx-> mc_sus_event_var); } break; } // while循环中处理各种消息 vStatus = WDA_McProcessMsg( pSchedContext-> pVContext, pMsgWrapper-> pVosMsg); vendor\\qcom\\opensource\\wlan\\prima\\CORE\\WDA\\src\\wlan_qct_wda.c VOS_STATUS WDA_McProcessMsg( v_CONTEXT_t pVosContext, vos_msg_t *pMsg ) { /* Process all the WDA messages.. */ switch( pMsg-> type ) { // 扫描初始化 case WDA_INIT_SCAN_REQ: { WDA_ProcessInitScanReq(pWDA, (tInitScanParams *)pMsg-> bodyptr) ; break ; } /* start SCAN request from PE */ case WDA_START_SCAN_REQ:// 扫描 { WDA_ProcessStartScanReq(pWDA, (tStartScanParams *)pMsg-> bodyptr) ; break ; }// 开始扫描请求 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\WDA\\src\\wlan_qct_wda.c VOS_STATUSWDA_ProcessStartScanReq(tWDA_CbContext *pWDA, tStartScanParams *startScanParams) {// 开始扫描, 使用回调函数,调用WDA_StartScanReqCallback. status = WDI_StartScanReq(wdiStartScanParams, WDA_StartScanReqCallback, pWdaParams) ; /* failure returned by WDI API */ if(IS_WDI_STATUS_FAILURE(status)) { VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, "Failure in Start Scan WDI API, free all the memory " "It should be due to previous abort scan." ); vos_mem_free(pWdaParams-> wdaWdiApiMsgParam); vos_mem_free(pWdaParams) ; startScanParams-> status = eSIR_FAILURE ; WDA_SendMsg(pWDA, WDA_START_SCAN_RSP, (void *)startScanParams, 0) ; } return CONVERT_WDI2VOS_STATUS(status) ; }vendor\\qcom\\opensource\\wlan\\prima\\CORE\\WDA\\src\\wlan_qct_wda.c void WDA_StartScanReqCallback(WDI_StartScanRspParamsType *pScanRsp, void* pUserData) { // 发送WDA_START_SCAN_RSP消息 /* assign status to scan params */ pWDA_ScanParam-> status = pScanRsp-> wdiStatus ; /* send SCAN RSP message back to PE */ WDA_SendMsg(pWDA, WDA_START_SCAN_RSP, (void *)pWDA_ScanParam, 0) ; return ; }vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMessageQueue.c void limProcessMessages(tpAniSirGlobal pMac, tpSirMsgQlimMsg) { case SIR_LIM_UPDATE_BEACON: limUpdateBeacon(pMac); // 更新beacon break; case WDA_INIT_SCAN_RSP: limProcessInitScanRsp(pMac, limMsg-> bodyptr); limMsg-> bodyptr = NULL; break; case WDA_START_SCAN_RSP:// 处理消息 limProcessStartScanRsp(pMac, limMsg-> bodyptr); limMsg-> bodyptr = NULL; break; // beacon处理函数。 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limUtils.cvendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmRspMessages.c void limProcessStartScanRsp(tpAniSirGlobal pMac,void *body) { tpStartScanParamspStartScanParam; eHalStatusstatus; SET_LIM_PROCESS_DEFD_MESGS(pMac, true); pStartScanParam = (tpStartScanParams) body; status = pStartScanParam-> status; #if defined WLAN_FEATURE_VOWIFI //HAL fills in the tx power used for mgmt frames in this field. //Store this value to use in TPC report IE. rrmCacheMgmtTxPower( pMac, pStartScanParam-> txMgmtPower, NULL ); //Store start TSF of scan start. This will be stored in BSS params. rrmUpdateStartTSF( pMac, pStartScanParam-> startTSF ); #endif vos_mem_free(body); body = NULL; if( pMac-> lim.abortScan ) { limLog( pMac, LOGW, FL(" finish scan") ); pMac-> lim.abortScan = 0; limDeactivateAndChangeTimer(pMac, eLIM_MIN_CHANNEL_TIMER); limDeactivateAndChangeTimer(pMac, eLIM_MAX_CHANNEL_TIMER); //Set the resume channel to Any valid channel (invalid). //This will instruct HAL to set it to any previous valid channel. peSetResumeChannel(pMac, 0, 0); limSendHalFinishScanReq(pMac, eLIM_HAL_FINISH_SCAN_WAIT_STATE); } switch(pMac-> lim.gLimHalScanState) { case eLIM_HAL_START_SCAN_WAIT_STATE: if (status != (tANI_U32) eHAL_STATUS_SUCCESS) { PELOGW(limLog(pMac, LOGW, FL("StartScanRsp with failed status= %d"), status); ) // // FIXME - With this, LIM will try and recover state, but // eWNI_SME_SCAN_CNF maybe reporting an incorrect // status back to the SME // //Set the resume channel to Any valid channel (invalid). //This will instruct HAL to set it to any previous valid channel. peSetResumeChannel(pMac, 0, 0); limSendHalFinishScanReq( pMac, eLIM_HAL_FINISH_SCAN_WAIT_STATE ); //limCompleteMlmScan(pMac, eSIR_SME_HAL_SCAN_INIT_FAILED); } else { pMac-> lim.gLimHalScanState = eLIM_HAL_SCANNING_STATE; limContinuePostChannelScan(pMac); // 扫描 } break; default: limLog(pMac, LOGW, FL("Rcvd StartScanRsp not in WAIT State, state %d"), pMac-> lim.gLimHalScanState); break; } return; }vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmReqMessages.c void limContinuePostChannelScan(tpAniSirGlobal pMac) { // 开始扫描 do { tSirMacAddrgSelfMacAddr; /* Send self MAC as src address if * MAC spoof is not enabled OR * spoofMacAddr is all 0 OR * disableP2PMacSpoof is enabled and scan is P2P scan * else use the spoofMac as src address */ if ((pMac-> lim.isSpoofingEnabled != TRUE) || (TRUE == vos_is_macaddr_zero((v_MACADDR_t *)& pMac-> lim.spoofMacAddr)) || (pMac-> roam.configParam.disableP2PMacSpoofing & & pMac-> lim.gpLimMlmScanReq-> p2pSearch)) { vos_mem_copy(gSelfMacAddr, pMac-> lim.gSelfMacAddr, VOS_MAC_ADDRESS_LEN); } else { vos_mem_copy(gSelfMacAddr, pMac-> lim.spoofMacAddr, VOS_MAC_ADDRESS_LEN); } limLog(pMac, LOG1, FL(" Mac Addr "MAC_ADDRESS_STR " used in sending ProbeReq number %d, for SSID %s on channel: %d"), MAC_ADDR_ARRAY(gSelfMacAddr) ,i, pMac-> lim.gpLimMlmScanReq-> ssId[i].ssId, channelNum); // include additional IE if there is // 发出probe request数据帧，主动扫描 status = limSendProbeReqMgmtFrame( pMac, & pMac-> lim.gpLimMlmScanReq-> ssId[i], pMac-> lim.gpLimMlmScanReq-> bssId, channelNum, gSelfMacAddr, pMac-> lim.gpLimMlmScanReq-> dot11mode, pMac-> lim.gpLimMlmScanReq-> uIEFieldLen, (tANI_U8 *)(pMac-> lim.gpLimMlmScanReq)+pMac-> lim.gpLimMlmScanReq-> uIEFieldOffset); if ( status != eSIR_SUCCESS) { PELOGE(limLog(pMac, LOGE, FL("send ProbeReq failed for SSID %s on channel: %d"), pMac-> lim.gpLimMlmScanReq-> ssId[i].ssId, channelNum); ) limDeactivateAndChangeTimer(pMac, eLIM_MIN_CHANNEL_TIMER); limSendHalEndScanReq(pMac, channelNum, eLIM_HAL_END_SCAN_WAIT_STATE); return; } i++; } while (i < pMac-> lim.gpLimMlmScanReq-> numSsid); else { tANI_U32 val; // 被动扫描 limLog(pMac, LOG1, FL("START PASSIVE Scan chan %d"), channelNum); /// Passive Scanning. Activate maxChannelTimer if (tx_timer_deactivate(& pMac-> lim.limTimers.gLimMaxChannelTimer)// 定时器, 信道停留最大时间 != TX_SUCCESS) { // Could not deactivate max channel timer. // Log error limLog(pMac, LOGE, FL("Unable to deactivate max channel timer")); limSendHalEndScanReq(pMac, channelNum, eLIM_HAL_END_SCAN_WAIT_STATE); } else { if (pMac-> miracast_mode) { val = DEFAULT_MIN_CHAN_TIME_DURING_MIRACAST + DEFAULT_MAX_CHAN_TIME_DURING_MIRACAST; } else if (wlan_cfgGetInt(pMac, WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME, & val) != eSIR_SUCCESS) { /** * Could not get max channel value * from CFG. Log error. */ limLog(pMac, LOGE, FL("could not retrieve passive max chan value, Use Def val")); val= WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME_STADEF; }val = SYS_MS_TO_TICKS(val); // 重新设置定时器 if (tx_timer_change(& pMac-> lim.limTimers.gLimMaxChannelTimer, val, 0) != TX_SUCCESS) { // Could not change max channel timer. // Log error limLog(pMac, LOGE, FL("Unable to change max channel timer")); limDeactivateAndChangeTimer(pMac, eLIM_MAX_CHANNEL_TIMER); limSendHalEndScanReq(pMac, channelNum, eLIM_HAL_END_SCAN_WAIT_STATE); return; } else if (tx_timer_activate(& pMac-> lim.limTimers.gLimMaxChannelTimer) != TX_SUCCESS) {limLog(pMac, LOGE, FL("could not start max channel timer")); limDeactivateAndChangeTimer(pMac, eLIM_MAX_CHANNEL_TIMER); limSendHalEndScanReq(pMac, channelNum, eLIM_HAL_END_SCAN_WAIT_STATE); return; } } // Wait for Beacons to arrive } // if (pMac-> lim.gLimMlmScanReq-> scanType == eSIR_ACTIVE_SCAN)limAddScanChannelInfo(pMac, channelNum); return; }probe request位置 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limSendManagementFrames.c停止定时器处理函数 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\SYS\\legacy\\src\\platform\\src\\VossWrapper.c超时处理函数, 代码中可以看到，好多超时用的都是同一个函数 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMessageQueue.c void limProcessMessages(tpAniSirGlobal pMac, tpSirMsgQlimMsg) case SIR_LIM_MIN_CHANNEL_TIMEOUT: case SIR_LIM_MAX_CHANNEL_TIMEOUT: case SIR_LIM_PERIODIC_PROBE_REQ_TIMEOUT: case SIR_LIM_JOIN_FAIL_TIMEOUT: case SIR_LIM_PERIODIC_JOIN_PROBE_REQ_TIMEOUT: case SIR_LIM_AUTH_FAIL_TIMEOUT: case SIR_LIM_AUTH_RSP_TIMEOUT: case SIR_LIM_ASSOC_FAIL_TIMEOUT: case SIR_LIM_REASSOC_FAIL_TIMEOUT: #ifdef WLAN_FEATURE_VOWIFI_11R case SIR_LIM_FT_PREAUTH_RSP_TIMEOUT: #endif case SIR_LIM_REMAIN_CHN_TIMEOUT: case SIR_LIM_INSERT_SINGLESHOT_NOA_TIMEOUT: case SIR_LIM_DISASSOC_ACK_TIMEOUT: case SIR_LIM_DEAUTH_ACK_TIMEOUT: case SIR_LIM_CONVERT_ACTIVE_CHANNEL_TO_PASSIVE: case SIR_LIM_AUTH_RETRY_TIMEOUT: case SIR_LIM_SAP_ECSA_TIMEOUT: #ifdef WLAN_FEATURE_LFR_MBB case SIR_LIM_PREAUTH_MBB_RSP_TIMEOUT: case SIR_LIM_REASSOC_MBB_RSP_TIMEOUT: #endif // These timeout messages are handled by MLM sub modulelimProcessMlmReqMessages(pMac, limMsg); break; }不同消息函数处理 vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmReqMessages.c void limProcessMlmReqMessages(tpAniSirGlobal pMac, tpSirMsgQ Msg) { switch (Msg-> type) { case LIM_MLM_START_REQ:limProcessMlmStartReq(pMac, Msg-> bodyptr); break; case LIM_MLM_SCAN_REQ:limProcessMlmScanReq(pMac, Msg-> bodyptr); break; #ifdef FEATURE_OEM_DATA_SUPPORT case LIM_MLM_OEM_DATA_REQ: limProcessMlmOemDataReq(pMac, Msg-> bodyptr); break; #endif case LIM_MLM_JOIN_REQ:limProcessMlmJoinReq(pMac, Msg-> bodyptr); break; case LIM_MLM_AUTH_REQ:limProcessMlmAuthReq(pMac, Msg-> bodyptr); break; case LIM_MLM_ASSOC_REQ:limProcessMlmAssocReq(pMac, Msg-> bodyptr); break; // 重关联超时 case LIM_MLM_REASSOC_REQ:limProcessMlmReassocReq(pMac, Msg-> bodyptr); break; // 取消关联请求 case LIM_MLM_DISASSOC_REQ:limProcessMlmDisassocReq(pMac, Msg-> bodyptr); break; case LIM_MLM_DEAUTH_REQ:limProcessMlmDeauthReq(pMac, Msg-> bodyptr); break; case LIM_MLM_SETKEYS_REQ:limProcessMlmSetKeysReq(pMac, Msg-> bodyptr); break; case LIM_MLM_REMOVEKEY_REQ:limProcessMlmRemoveKeyReq(pMac, Msg-> bodyptr); break; case SIR_LIM_MIN_CHANNEL_TIMEOUT:limProcessMinChannelTimeout(pMac); break; // 超时处理 case SIR_LIM_MAX_CHANNEL_TIMEOUT:limProcessMaxChannelTimeout(pMac); break; case SIR_LIM_PERIODIC_PROBE_REQ_TIMEOUT: limProcessPeriodicProbeReqTimer(pMac); break; case SIR_LIM_JOIN_FAIL_TIMEOUT:limProcessJoinFailureTimeout(pMac); break; case SIR_LIM_PERIODIC_JOIN_PROBE_REQ_TIMEOUT: limProcessPeriodicJoinProbeReqTimer(pMac); break; case SIR_LIM_AUTH_FAIL_TIMEOUT:limProcessAuthFailureTimeout(pMac); break; case SIR_LIM_AUTH_RSP_TIMEOUT:limProcessAuthRspTimeout(pMac, Msg-> bodyval); break; case SIR_LIM_ASSOC_FAIL_TIMEOUT:limProcessAssocFailureTimeout(pMac, Msg-> bodyval); break; #ifdef WLAN_FEATURE_VOWIFI_11R case SIR_LIM_FT_PREAUTH_RSP_TIMEOUT:limProcessFTPreauthRspTimeout(pMac); break; #endif #ifdef WLAN_FEATURE_LFR_MBB case SIR_LIM_PREAUTH_MBB_RSP_TIMEOUT: lim_process_preauth_mbb_rsp_timeout(pMac); break; case SIR_LIM_REASSOC_MBB_RSP_TIMEOUT: lim_process_reassoc_mbb_rsp_timeout(pMac); break; #endif case SIR_LIM_REMAIN_CHN_TIMEOUT:limProcessRemainOnChnTimeout(pMac); break; case SIR_LIM_INSERT_SINGLESHOT_NOA_TIMEOUT: limProcessInsertSingleShotNOATimeout(pMac); break; case SIR_LIM_CONVERT_ACTIVE_CHANNEL_TO_PASSIVE: limConvertActiveChannelToPassiveChannel(pMac); break; case SIR_LIM_AUTH_RETRY_TIMEOUT: limProcessAuthRetryTimer(pMac); break; case SIR_LIM_DISASSOC_ACK_TIMEOUT:limProcessDisassocAckTimeout(pMac); break; case SIR_LIM_DEAUTH_ACK_TIMEOUT:limProcessDeauthAckTimeout(pMac); break; case SIR_LIM_SAP_ECSA_TIMEOUT:lim_process_ap_ecsa_timeout(pMac); break; case LIM_MLM_ADDBA_REQ:limProcessMlmAddBAReq( pMac, Msg-> bodyptr ); break; case LIM_MLM_ADDBA_RSP:limProcessMlmAddBARsp( pMac, Msg-> bodyptr ); break; case LIM_MLM_DELBA_REQ:limProcessMlmDelBAReq( pMac, Msg-> bodyptr ); break; case LIM_MLM_TSPEC_REQ: default: break; } // switch (msgType) } /*** end limProcessMlmReqMessages() ***/vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmReqMessages.c void limProcessMlmReqMessages(tpAniSirGlobal pMac, tpSirMsgQ Msg)vendor\\qcom\\opensource\\wlan\\prima\\CORE\\MAC\\src\\pe\\lim\\limProcessMlmReqMessages.c 超时函数 static void limProcessMaxChannelTimeout(tpAniSirGlobal pMac) { tANI_U8 channelNum; /*do not process if we are in finish scan wait state i.e. scan is aborted or finished*/ if ((pMac-> lim.gLimMlmState == eLIM_MLM_WT_PROBE_RESP_STATE || pMac-> lim.gLimMlmState == eLIM_MLM_PASSIVE_SCAN_STATE) & & pMac-> lim.gLimHalScanState != eLIM_HAL_FINISH_SCAN_WAIT_STATE) { limLog(pMac, LOG1, FL("Scanning : Max channel timed out")); // 打印log，提示超时 /** * MAX channel timer timed out * Continue channel scan. */ limDeactivateAndChangeTimer(pMac, eLIM_MAX_CHANNEL_TIMER); limDeactivateAndChangeTimer(pMac, eLIM_PERIODIC_PROBE_REQ_TIMER); pMac-> lim.limTimers.gLimPeriodicProbeReqTimer.sessionId = 0xff; pMac-> lim.probeCounter = 0; if (pMac-> lim.gLimCurrentScanChannelId < = (tANI_U32)(pMac-> lim.gpLimMlmScanReq-> channelList.numChannels - 1)) { channelNum = limGetCurrentScanChannel(pMac); } else { if(pMac-> lim.gpLimMlmScanReq-> channelList.channelNumber) { channelNum = pMac-> lim.gpLimMlmScanReq-> channelList.channelNumber[pMac-> lim.gpLimMlmScanReq-> channelList.numChannels - 1]; } else { channelNum = 1; } } limLog(pMac, LOGW, FL("Sending End Scan req from MAX_CH_TIMEOUT in state %d on ch-%d"),// kerel log pMac-> lim.gLimMlmState,channelNum); limSendHalEndScanReq(pMac, channelNum, eLIM_HAL_END_SCAN_WAIT_STATE); // 停止扫描请求 } else { /** * MAX channel timer should not have timed out * in states other than wait_scan. * Log error. */ limLog(pMac, LOGW, FL("received unexpected MAX channel timeout in mlme state %d and hal scan state %d"), pMac-> lim.gLimMlmState, pMac-> lim.gLimHalScanState); limPrintMlmState(pMac, LOGW, pMac-> lim.gLimMlmState); } } /*** limProcessMaxChannelTimeout() ***/