使用二进制方式搭建k8s集群（亲测有效）

黄沙百战穿金甲，不破楼兰终不还。这篇文章主要讲述使用二进制方式搭建k8s集群（亲测有效）相关的知识，希望能为你提供帮助。
安装要求在开始之前，部署Kubernetes集群机器需要满足以下几个条件：

一台或多台机器，操作系统CentOS7.x-86_64（个人选择CentOS7.2）
硬件配置：2GB或更多RAM，2个CPU或更多CPU，硬盘30GB或更多
集群中所有机器之间网络互通
可以访问外网，需要拉取镜像，如果服务器不能上网，需要提前下载镜像并导入节点
禁止swap分区

准备环境（1）软件环境：

软件	版本
Kubernetes	1.19

（2）服务器规划：

角色	IP	组件
k8s-m1	192.168.1.147	kube-apiserver, kube-controller-manager, kube-scheduler, etcd
k8s-n1	192.168.1.148	kubelet, kube-proxy, docker etcd

操作系统初始化配置

# 关闭防火墙如果是minimal安装，默认没有装firewalld
systemctl stop firewalld
systemctl disable firewalld

#关闭selinux
sed -i s/enforcing/disabled/ /etc/selinux/config #永久
setenforce 0 #临时

#关闭swap
swapoff -a #临时
sed -ri s/.*swap.*/#& / /etc/fstab #永久

#根据规划设置主机名
hostnamectl set-hostname < hostname> #分别设置为k8s-m1、k8s-n1
hostname #确认是否配置生效

#在master添加hosts
cat > > /etc/hosts < < EOF
192.168.1.147 k8s-m1
192.168.1.148 k8s-n1
EOF
ping k8s-n1 #确认配置生效

#将桥接的IPv4流量传递到iptables的链
cat > /etc/sysctl.d/k8s.conf < < EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system #生效

#时间同步
yum install ntpdate -y
ntpdate time.windows.com

部署etcd集群etcd是一个分布式键值存储系统，Kubernetes使用etcd进行数据存储，所以先准备一个etcd数据库，为解决etcd单点故障，应采用集群方式部署，这里使用2台组建集群，当然，你也可以使用3台、5台组建集群，可容忍1台、2台机器故障。

节点名称	IP
etcd-1	192.168.1.147
etcd-2	192.168.1.148

注：为了节省机器，这里与k8s节点机器复用，也可以独立于k8s集群之外部署，只要apiserver能连接就行。
4.1 准备cfssl证书生成工具
cfssl是一个开源的证书管理工具，使用json文件生成证书，相比openssl更方便使用。
找任意一台服务器操作，这里用k8s-m1节点。

yum install wget -y
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

#确认文件移到正确的位置
$ ls -l /usr/local/bin/
total 18808
-rwxr-xr-x. 1 root root 10376657 Dec7 02:36 cfssl
-rwxr-xr-x. 1 root root6595195 Dec7 02:36 cfssl-certinfo
-rwxr-xr-x. 1 root root2277873 Dec7 02:35 cfssljson

4.2 生成etcd证书
（1）自签证书颁发机构（CA）
创建工作目录：

mkdir -p ~/TLS/etcd,k8s
cd ~/TLS/etcd

自签CA：

cat > ca-config.json < < EOF

"signing":
"default":
"expiry": "87600h"
,
"profiles":
"www":
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]

EOF

cat > ca-csr.json < < EOF

"CN": "etcd CA",
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "Beijing"

]

EOF

生成证书：

$ cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
2022/01/31 20:33:58 [INFO] generating a new CA key and certificate from CSR
2022/01/31 20:33:58 [INFO] generate received request
2022/01/31 20:33:58 [INFO] received CSR
2022/01/31 20:33:58 [INFO] generating key: rsa-2048
2022/01/31 20:33:58 [INFO] encoded CSR

$ ls *pem
ca-key.pemca.pem

（2）使用自签CA签发etcd HTTPS证书
创建证书申请文件：

cat > server-csr.json < < EOF

"CN": "etcd",
"hosts": [
"192.168.1.147",
"192.168.1.148"
],
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "Beijing",
"ST": "Beijing"

]

EOF

注：上述文件hosts字段中IP为所有etcd及诶单的集群内部通信IP，一个都不能少！为了方便后期扩容可以多些几个预留的IP。
生成证书：

$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server
2022/01/31 20:34:22 [INFO] generate received request
2022/01/31 20:34:22 [INFO] received CSR
2022/01/31 20:34:22 [INFO] generating key: rsa-2048
2022/01/31 20:34:23 [INFO] encoded CSR
2022/01/31 20:34:23 [INFO] signed certificate with serial number 662529260630305134909583808009574907087019149943
2022/01/31 20:34:23 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

$ ls server*pem
server-key.pemserver.pem

4.3 从Github下载二进制文件
下载地址：
??https://github.com/etcd-io/etcd/releases/download/v3.4.9/etcd-v3.4.9-linux-amd64.tar.gz??

cd ~
wget https://github.com/etcd-io/etcd/releases/download/v3.4.9/etcd-v3.4.9-linux-amd64.tar.gz

4.4 部署etcd集群
以下在节点1（k8s-m1）上操作，为简化操作，待会儿将节点1生成的所有文件拷贝到节点2（k8s-n1）。
（1）创建工作目录并解压二进制包

mkdir /opt/etcd/bin,cfg,ssl -p
tar zxvf etcd-v3.4.9-linux-amd64.tar.gz
mv etcd-v3.4.9-linux-amd64/etcd,etcdctl /opt/etcd/bin/

（2）创建etcd配置文件

cat > /opt/etcd/cfg/etcd.conf < < EOF
#[Member]
ETCD_NAME="etcd-1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.147:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.147:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.147:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.147:2379"
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.1.147:2380,etcd-2=https://192.168.1.148:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF

（3）systemd管理etcd

cat > /usr/lib/systemd/system/etcd.service < < EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd.conf
ExecStart=/opt/etcd/bin/etcd \\
--cert-file=/opt/etcd/ssl/server.pem \\
--key-file=/opt/etcd/ssl/server-key.pem \\
--peer-cert-file=/opt/etcd/ssl/server.pem \\
--peer-key-file=/opt/etcd/ssl/server-key.pem \\
--trusted-ca-file=/opt/etcd/ssl/ca.pem \\
--peer-trusted-ca-file=/opt/etcd/ssl/ca.pem \\
--logger=zap
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

（4）拷贝刚才生成的证书
把刚才生成的证书拷贝到配置文件中的路径：

cp ~/TLS/etcd/ca*pem ~/TLS/etcd/server*pem /opt/etcd/ssl/

（5）将上面节点1所有的生成文件拷贝到节点2

scp -r /opt/etcd/ root@192.168.1.148:/opt/
scp /usr/lib/systemd/system/etcd.service root@192.168.1.148:/usr/lib/systemd/system/

然后在节点2修改etcd.conf配置文件中的节点名称和当前服务器IP：

vi /opt/etcd/cfg/etcd.conf
#[Member]
ETCD_NAME="etcd-2"# 修改此处，节点2改为etcd-2
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.148:2380"# 修改此处为当前服务器IP
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.148:2379" # 修改此处为当前服务器IP

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.148:2380" # 修改此处为当前服务器IP
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.148:2379" # 修改此处为当前服务器IP
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.1.147:2380,etcd-2=https://192.168.1.148:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

（6）分别在2个节点上操作，启动并设置开机启动
【使用二进制方式搭建k8s集群（亲测有效）】

systemctl daemon-reload
systemctl start etcd # 只有其中1节点启动正常，另1节点才启动正常
systemctl enable etcd

（7）查看集群状态

$ systemctl status etcd # 以master为例
● etcd.service - Etcd Server
Loaded: loaded (/usr/lib/systemd/system/etcd.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:38:43 EST; 15s ago
Main PID: 3193 (etcd)
CGroup: /system.slice/etcd.service
└─3193 /opt/etcd/bin/etcd --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --peer-cert-file=/...

Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.558-0500","caller":"rafthttp/stream.go:425","msg...f0fb9"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.561-0500","caller":"raft/raft.go:859","msg":"bd5...: 13]"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.561-0500","caller":"raft/raft.go:700","msg":"bd5...rm 13"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.561-0500","caller":"raft/raft.go:960","msg":"bd5...rm 13"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.562-0500","caller":"raft/node.go:325","msg":"raf...rm 13"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.590-0500","caller":"etcdserver/server.go:2036","msg":"p...
Jan 31 20:38:43 k8s-m1 systemd[1]: Started Etcd Server.
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.592-0500","caller":"embed/serve.go:191","msg":"s...:2379"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.606-0500","caller":"membership/cluster.go:558","...:"3.4"
Jan 31 20:38:43 k8s-m1 etcd[3193]: "level":"info","ts":"2022-01-31T20:38:43.606-0500","caller":"api/capability.go:76","msg":...:"3.4"
Hint: Some lines were ellipsized, use -l to show in full.

$ ETCDCTL_API=3 /opt/etcd/bin/etcdctl --cacert=/opt/etcd/ssl/ca.pem --cert=/opt/etcd/ssl/server.pem --key=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.1.147:2379,https://192.168.1.148:2379" endpoint health
https://192.168.1.147:2379 is healthy: successfully committed proposal: took = 32.800257ms
https://192.168.1.148:2379 is healthy: successfully committed proposal: took = 35.691684ms

安装Docker下载地址：
??https://download.docker.com/linux/static/stable/x86_64/docker-19.03.9.tgz??

# 两个节点都需下载
wget https://download.docker.com/linux/static/stable/x86_64/docker-19.03.9.tgz

以下在所有节点操作，这里采用二进制安装，用yum安装也一样。
（1）解压二进制包

tar zxvf docker-19.03.9.tgz
mv docker/* /usr/bin

（2）systemd管理docker

cat > /usr/lib/systemd/system/docker.service < < EOF
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target
[Service]
Type=notify
ExecStart=/usr/bin/dockerd
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s
[Install]
WantedBy=multi-user.target
EOF

（3）创建配置文件

mkdir /etc/docker
cat > /etc/docker/daemon.json < < EOF

"registry-mirrors": ["https://b9pmyelo.mirror.aliyuncs.com"]

EOF
# registry-mirrors 阿里云镜像加速器

（4）启动并设置开机启动

systemctl daemon-reload
systemctl start docker
systemctl enable docker

# 确认启动正常，以master为例
$ systemctl status docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:41:19 EST; 6s ago
Docs: https://docs.docker.com
Main PID: 3258 (dockerd)
CGroup: /system.slice/docker.service
├─3258 /usr/bin/dockerd
└─3266 containerd --config /var/run/docker/containerd/containerd.toml --log-level info

Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.380636521-05:00" level=error msg="Failed to built-in GetDrive...docker"
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.395520006-05:00" level=warning msg="mountpoint for pids not found"
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.395725127-05:00" level=info msg="Loading containers: start."
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.403734059-05:00" level=warning msg="Running modprobe bridge br_netfi...
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.508149552-05:00" level=info msg="Default bridge (docker0) is ...ddress"
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.577201992-05:00" level=info msg="Loading containers: done."
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.607712388-05:00" level=info msg="Docker daemon" commit=9d9883...19.03.9
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.607976741-05:00" level=info msg="Daemon has completed initialization"
Jan 31 20:41:19 k8s-m1 dockerd[3258]: time="2022-01-31T20:41:19.638941291-05:00" level=info msg="API listen on /var/run/docker.sock"
Jan 31 20:41:19 k8s-m1 systemd[1]: Started Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.

部署Master Node6.1 生成kube-apiserver证书
（1）自签证书颁发机构（CA）

cd ~/TLS/k8s
cat > ca-config.json < < EOF

"signing":
"default":
"expiry": "87600h"
,
"profiles":
"kubernetes":
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]

EOF
cat > ca-csr.json < < EOF

"CN": "kubernetes",
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "Beijing",
"ST": "Beijing",
"O": "k8s",
"OU": "System"

]

EOF

生成证书：

$ cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
2022/01/31 20:48:05 [INFO] generating a new CA key and certificate from CSR
2022/01/31 20:48:05 [INFO] generate received request
2022/01/31 20:48:05 [INFO] received CSR
2022/01/31 20:48:05 [INFO] generating key: rsa-2048
2022/01/31 20:48:05 [INFO] encoded CSR
2022/01/31 20:48:05 [INFO] signed certificate with serial number 116190676499051077223279420283858349481970680819

$ ls *pem
ca-key.pemca.pem

（2）使用自签CA签发kube-apiserver HTTPS证书
创建证书申请文件：

cat > server-csr.json < < EOF

"CN": "kubernetes",
"hosts": [
"10.0.0.1",
"127.0.0.1",
"192.168.1.147",
"192.168.1.148",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"

]

EOF

注：上述文件hosts字段中IP为所有Master/LB/VIP IP，一个都不能少！为了方便后期扩容可以多写几个预留的IP。
生成证书：

$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server
2022/01/31 20:48:29 [INFO] generate received request
2022/01/31 20:48:29 [INFO] received CSR
2022/01/31 20:48:29 [INFO] generating key: rsa-2048
2022/01/31 20:48:29 [INFO] encoded CSR
2022/01/31 20:48:29 [INFO] signed certificate with serial number 269930624984000095763889980982980819493992440261
2022/01/31 20:48:29 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

$ ls server*pem
server-key.pemserver.pem

6.2 从Github下载二进制文件
通过github查看下载链接，
??https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG，下载v1.19版本的服务端二进制文件??

cd ~
wget https://dl.k8s.io/v1.19.16/kubernetes-server-linux-amd64.tar.gz

6.3 解压二进制包

mkdir -p /opt/kubernetes/bin,cfg,ssl,logs
tar zxvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin
cp kube-apiserver kube-scheduler kube-controller-manager /opt/kubernetes/bin
cp kubectl /usr/bin/

6.4 部署kube-apiserver
（1）创建配置文件

cat > /opt/kubernetes/cfg/kube-apiserver.conf < < EOF
KUBE_APISERVER_OPTS="--logtostderr=false \\\\
--v=2 \\\\
--log-dir=/opt/kubernetes/logs \\\\
--etcd-servers=https://192.168.1.147:2379,https://192.168.1.148:2379 \\\\
--bind-address=192.168.1.147 \\\\
--secure-port=6443 \\\\
--advertise-address=192.168.1.147 \\\\
--allow-privileged=true \\\\
--service-cluster-ip-range=10.0.0.0/24 \\\\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction \\\\
--authorization-mode=RBAC,Node \\\\
--enable-bootstrap-token-auth=true \\\\
--token-auth-file=/opt/kubernetes/cfg/token.csv \\\\
--service-node-port-range=30000-32767 \\\\
--kubelet-client-certificate=/opt/kubernetes/ssl/server.pem \\\\
--kubelet-client-key=/opt/kubernetes/ssl/server-key.pem \\\\
--tls-cert-file=/opt/kubernetes/ssl/server.pem\\\\
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\\\
--client-ca-file=/opt/kubernetes/ssl/ca.pem \\\\
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
--etcd-cafile=/opt/etcd/ssl/ca.pem \\\\
--etcd-certfile=/opt/etcd/ssl/server.pem \\\\
--etcd-keyfile=/opt/etcd/ssl/server-key.pem \\\\
--audit-log-maxage=30 \\\\
--audit-log-maxbackup=3 \\\\
--audit-log-maxsize=100 \\\\
--audit-log-path=/opt/kubernetes/logs/k8s-audit.log"
EOF

注：上面两个\\ \\ 第一个是转义符，第二个是换行符，使用转义符是为了使用EOF保留换行符。

–logtostderr：启用日志
—v：日志等级
–log-dir：日志目录
–etcd-servers：etcd集群地址
–bind-address：监听地址
–secure-port：https安全端口
–advertise-address：集群通告地址
–allow-privileged：启用授权
–service-cluster-ip-range：Service虚拟IP地址段
–enable-admission-plugins：准入控制模块
–authorization-mode：认证授权，启用RBAC授权和节点自管理
–enable-bootstrap-token-auth：启用TLS bootstrap机制
–token-auth-file：bootstrap token文件
–service-node-port-range：Service nodeport类型默认分配端口范围
–kubelet-client-xxx：apiserver访问kubelet客户端证书
–tls-xxx-file：apiserver https证书
–etcd-xxxfile：连接Etcd集群证书
–audit-log-xxx：审计日志

（2）拷贝刚才生成的证书
把刚才生成的证书拷贝到配置文件中的路径：

cp ~/TLS/k8s/ca*pem ~/TLS/k8s/server*pem /opt/kubernetes/ssl/

（3）启用 TLS Bootstrapping 机制
TLS Bootstraping：Master apiserver启用TLS认证后，Node节点kubelet和kube-proxy要与kube-apiserver进行通信，必须使用CA签发的有效证书才可以，当Node节点很多时，这种客户端证书颁发需要大量工作，同样也会增加集群扩展复杂度。为了简化流程，Kubernetes引入了TLS bootstraping机制来自动颁发客户端证书，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。所以强烈建议在Node上使用这种方式，目前主要用于kubelet，kube-proxy还是由我们统一颁发一个证书。
TLS bootstraping 工作流程：

文章图片

创建上述配置文件中token文件：

cat > /opt/kubernetes/cfg/token.csv < < EOF
c47ffb939f5ca36231d9e3121a252940,kubelet-bootstrap,10001,"system:node-bootstrapper"
EOF

格式：token，用户名，UID，用户组
token也可自行生成替换：

head -c 16 /dev/urandom | od -An -t x | tr -d

（4）systemd管理apiserver

cat > /usr/lib/systemd/system/kube-apiserver.service < < EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-apiserver.conf
ExecStart=/opt/kubernetes/bin/kube-apiserver \\$KUBE_APISERVER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF

（5）启动并设置开机启动

systemctl daemon-reload
systemctl start kube-apiserver
systemctl enable kube-apiserver

# 确认状态运行正常
$ systemctl status kube-apiserver
● kube-apiserver.service - Kubernetes API Server
Loaded: loaded (/usr/lib/systemd/system/kube-apiserver.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:50:15 EST; 10s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 3519 (kube-apiserver)
CGroup: /system.slice/kube-apiserver.service
└─3519 /opt/kubernetes/bin/kube-apiserver --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --etcd-servers=https:/...

Jan 31 20:50:15 k8s-m1 systemd[1]: Started Kubernetes API Server.
Jan 31 20:50:15 k8s-m1 systemd[1]: Starting Kubernetes API Server...
Jan 31 20:50:21 k8s-m1 kube-apiserver[3519]: E0131 20:50:21.2704733519 controller.go:152] Unable to remove old endpoints f...orMsg:
Hint: Some lines were ellipsized, use -l to show in full.

（6）授权kubelet-bootstrap用户允许请求证书

kubectl create clusterrolebinding kubelet-bootstrap \\
--clusterrole=system:node-bootstrapper \\
--user=kubelet-bootstrap

6.5 部署kube-controller-manager
（1）创建配置文件

cat > /opt/kubernetes/cfg/kube-controller-manager.conf < < EOF
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=false \\\\
--v=2 \\\\
--log-dir=/opt/kubernetes/logs \\\\
--leader-elect=true \\\\
--master=127.0.0.1:8080 \\\\
--bind-address=127.0.0.1 \\\\
--allocate-node-cidrs=true \\\\
--cluster-cidr=10.244.0.0/16 \\\\
--service-cluster-ip-range=10.0.0.0/24 \\\\
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\\\
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem\\\\
--root-ca-file=/opt/kubernetes/ssl/ca.pem \\\\
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
--experimental-cluster-signing-duration=87600h0m0s"
EOF

–master：通过本地非安全本地端口8080连接apiserver。
–leader-elect：当该组件启动多个时，自动选举（HA）
–
cluster-signing-cert-file/–cluster-signing-key-file：自动为kubelet颁发证书的CA，与apiserver保持一致
（2）systemd管理controller-manager

cat > /usr/lib/systemd/system/kube-controller-manager.service < < EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-controller-manager.conf
ExecStart=/opt/kubernetes/bin/kube-controller-manager \\$KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF

（3）启动并设置开机启动

systemctl daemon-reload
systemctl start kube-controller-manager
systemctl enable kube-controller-manager

# 确认状态运行正常
$ systemctl status kube-controller-manager
● kube-controller-manager.service - Kubernetes Controller Manager
Loaded: loaded (/usr/lib/systemd/system/kube-controller-manager.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:51:00 EST; 6s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 3574 (kube-controller)
CGroup: /system.slice/kube-controller-manager.service
└─3574 /opt/kubernetes/bin/kube-controller-manager --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --leader-elec...

Jan 31 20:51:00 k8s-m1 systemd[1]: Started Kubernetes Controller Manager.
Jan 31 20:51:00 k8s-m1 systemd[1]: Starting Kubernetes Controller Manager...
Jan 31 20:51:00 k8s-m1 kube-controller-manager[3574]: Flag --experimental-cluster-signing-duration has been deprecated, use --...ration
Hint: Some lines were ellipsized, use -l to show in full.

6.6 部署kube-scheduler
（1）创建配置文件

cat > /opt/kubernetes/cfg/kube-scheduler.conf < < EOF
KUBE_SCHEDULER_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/opt/kubernetes/logs \\
--leader-elect \\
--master=127.0.0.1:8080 \\
--bind-address=127.0.0.1"
EOF

–master：通过本地非安全本地端口8080连接apiserver。
–leader-elect：当该组件启动多个时，自动选举（HA）
（2）systemd管理scheduler

cat > /usr/lib/systemd/system/kube-scheduler.service < < EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-scheduler.conf
ExecStart=/opt/kubernetes/bin/kube-scheduler \\$KUBE_SCHEDULER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF

（3）启动并设置开机启动

systemctl daemon-reload
systemctl start kube-scheduler
systemctl enable kube-scheduler

# 确认状态运行正常
$ systemctl status kube-scheduler
● kube-scheduler.service - Kubernetes Scheduler
Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:51:40 EST; 6s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 3622 (kube-scheduler)
CGroup: /system.slice/kube-scheduler.service
└─3622 /opt/kubernetes/bin/kube-scheduler --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --leader-elect --maste...

Jan 31 20:51:40 k8s-m1 systemd[1]: Started Kubernetes Scheduler.
Jan 31 20:51:40 k8s-m1 systemd[1]: Starting Kubernetes Scheduler...
Jan 31 20:51:41 k8s-m1 kube-scheduler[3622]: I0131 20:51:41.1068303622 registry.go:173] Registering SelectorSpread plugin
Jan 31 20:51:41 k8s-m1 kube-scheduler[3622]: I0131 20:51:41.1069283622 registry.go:173] Registering SelectorSpread plugin

（4）查看集群状态
生成kubectl连接集群的证书：

cat > ~/TLS/k8s/admin-csr.json < < EOF

"CN": "admin",
"hosts": [],
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "system:masters",
"OU": "System"

]

EOF

cd ~/TLS/k8s/
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
2022/01/31 20:52:20 [INFO] generate received request
2022/01/31 20:52:20 [INFO] received CSR
2022/01/31 20:52:20 [INFO] generating key: rsa-2048
2022/01/31 20:52:20 [INFO] encoded CSR
2022/01/31 20:52:20 [INFO] signed certificate with serial number 33977062448795114188979902834329419113167886225
2022/01/31 20:52:20 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

生成kubeconfig文件：

mkdir /root/.kube
cd ~/TLS/k8s/

KUBE_CONFIG="/root/.kube/config"
KUBE_APISERVER="https://192.168.1.147:6443"

kubectl config set-cluster kubernetes \\
--certificate-authority=/opt/kubernetes/ssl/ca.pem \\
--embed-certs=true \\
--server=$KUBE_APISERVER \\
--kubeconfig=$KUBE_CONFIG
kubectl config set-credentials cluster-admin \\
--client-certificate=./admin.pem \\
--client-key=./admin-key.pem \\
--embed-certs=true \\
--kubeconfig=$KUBE_CONFIG
kubectl config set-context default \\
--cluster=kubernetes \\
--user=cluster-admin \\
--kubeconfig=$KUBE_CONFIG
kubectl config use-context default --kubeconfig=$KUBE_CONFIG

所有组件都已经启动成功，通过kubectl工具查看当前集群组件状态：

$ kubectl get cs # 曾在kubectl config set-credentials命令后出现错误，需要进入~/TLS/k8s目录下
Warning: v1 ComponentStatus is deprecated in v1.19+
NAMESTATUSMESSAGEERROR
schedulerHealthyok
controller-managerHealthyok
etcd-0Healthy"health":"true"
etcd-1Healthy"health":"true"

如上输出说明Master节点组件运行正常
部署Worker Node说明：下面还是在Master Node上操作，即同时作为Worker Node
7.1 创建工作目录并拷贝二进制文件
（1）在所有worker node创建工作目录：

cd ~
mkdir -p /opt/kubernetes/bin,cfg,ssl,logs # 之前master上已创建，无需再创建

从master节点拷贝：

cd kubernetes/server/bin
cp kubelet kube-proxy /opt/kubernetes/bin# 本地拷贝

7.2 部署kubelet
（1）创建配置文件

cat > /opt/kubernetes/cfg/kubelet.conf < < EOF
KUBELET_OPTS="--logtostderr=false \\\\
--v=2 \\\\
--log-dir=/opt/kubernetes/logs \\\\
--hostname-override=k8s-m1 \\\\
--network-plugin=cni \\\\
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\\\
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\\\
--config=/opt/kubernetes/cfg/kubelet-config.yml \\\\
--cert-dir=/opt/kubernetes/ssl \\\\
--pod-infra-container-image=lizhenliang/pause-amd64:3.0"
EOF

–hostname-override：显示名称，集群中唯一
–network-plugin：启用CNI
–kubeconfig：空路径，会自动生成，后面用于连接apiserver
–bootstrap-kubeconfig：首次启动向apiserver申请证书
–config：配置参数文件
–cert-dir：kubelet证书生成目录
–pod-infra-container-image：管理Pod网络容器的镜像
（2）配置参数文件

cat > /opt/kubernetes/cfg/kubelet-config.yml < < EOF
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS:
- 10.0.0.2
clusterDomain: cluster.local
failSwapOn: false
authentication:
anonymous:
enabled: false
webhook:
cacheTTL: 2m0s
enabled: true
x509:
clientCAFile: /opt/kubernetes/ssl/ca.pem
authorization:
mode: Webhook
webhook:
cacheAuthorizedTTL: 5m0s
cacheUnauthorizedTTL: 30s
evictionHard:
imagefs.available: 15%
memory.available: 100Mi
nodefs.available: 10%
nodefs.inodesFree: 5%
maxOpenFiles: 1000000
maxPods: 110
EOF

（3）生成bootstrap.kubeconfig文件

cd ~
KUBE_APISERVER="https://192.168.1.147:6443" # apiserver IP:PORT
TOKEN="c47ffb939f5ca36231d9e3121a252940" # 与token.csv里保持一致

# 生成 kubelet bootstrap kubeconfig 配置文件
kubectl config set-cluster kubernetes \\
--certificate-authority=/opt/kubernetes/ssl/ca.pem \\
--embed-certs=true \\
--server=$KUBE_APISERVER \\
--kubeconfig=bootstrap.kubeconfig
kubectl config set-credentials "kubelet-bootstrap" \\
--token=$TOKEN \\
--kubeconfig=bootstrap.kubeconfig
kubectl config set-context default \\
--cluster=kubernetes \\
--user="kubelet-bootstrap" \\
--kubeconfig=bootstrap.kubeconfig
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

拷贝到配置文件路径：

cp bootstrap.kubeconfig /opt/kubernetes/cfg

（4）systemd管理kubelet

cat > /usr/lib/systemd/system/kubelet.service < < EOF
[Unit]
Description=Kubernetes Kubelet
After=docker.service
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet.conf
ExecStart=/opt/kubernetes/bin/kubelet \\$KUBELET_OPTS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF

（5）启动并设置开机启动

systemctl daemon-reload
systemctl start kubelet
systemctl enable kubelet

# 确认状态正常运行
$ systemctl status kubelet
● kubelet.service - Kubernetes Kubelet
Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 20:57:36 EST; 6s ago
Main PID: 3744 (kubelet)
CGroup: /system.slice/kubelet.service
└─3744 /opt/kubernetes/bin/kubelet --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --hostname-override=k8s-m1 --...

Jan 31 20:57:36 k8s-m1 systemd[1]: Started Kubernetes Kubelet.
Jan 31 20:57:36 k8s-m1 systemd[1]: Starting Kubernetes Kubelet...

7.3 批准kubelet证书申请并加入集群

# 查看kubelet证书请求
$ kubectl get csr
NAMEAGESIGNERNAMEREQUESTORCONDITION
node-csr-mJUDZWs1ZgjeMxO5cKHmN93miRvt-aVFHE25fmcfEC020skubernetes.io/kube-apiserver-client-kubeletkubelet-bootstrapPending

# 批准申请
$ kubectl certificate approve node-csr-mJUDZWs1ZgjeMxO5cKHmN93miRvt-aVFHE25fmcfEC0
certificatesigningrequest.certificates.k8s.io/node-csr-mJUDZWs1ZgjeMxO5cKHmN93miRvt-aVFHE25fmcfEC0 approved

# 查看节点
$ kubectl get node
NAMESTATUSROLESAGEVERSION
k8s-m1NotReady< none> 6sv1.19.16

注：由于网络插件还没有部署，节点会没有准备就绪 NotReady
7.4 部署kube-proxy
（1）创建配置文件

cat > /opt/kubernetes/cfg/kube-proxy.conf < < EOF
KUBE_PROXY_OPTS="--logtostderr=false \\\\
--v=2 \\\\
--log-dir=/opt/kubernetes/logs \\\\
--config=/opt/kubernetes/cfg/kube-proxy-config.yml"
EOF

（2）配置参数文件

cat > /opt/kubernetes/cfg/kube-proxy-config.yml < < EOF
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 0.0.0.0
metricsBindAddress: 0.0.0.0:10249
clientConnection:
kubeconfig: /opt/kubernetes/cfg/kube-proxy.kubeconfig
hostnameOverride: k8s-m1
clusterCIDR: 10.0.0.0/24
EOF

（3）生成kube-proxy.kubeconfig文件
生成kube-proxy证书：

# 切换工作目录
cd TLS/k8s

# 创建证书请求文件
cat > kube-proxy-csr.json < < EOF

"CN": "system:kube-proxy",
"hosts": [],
"key":
"algo": "rsa",
"size": 2048
,
"names": [

"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"

]

EOF

# 生成证书
$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
2022/01/31 20:59:20 [INFO] generate received request
2022/01/31 20:59:20 [INFO] received CSR
2022/01/31 20:59:20 [INFO] generating key: rsa-2048
2022/01/31 20:59:20 [INFO] encoded CSR
2022/01/31 20:59:20 [INFO] signed certificate with serial number 295992655043122107605462071788881029347482203196
2022/01/31 20:59:20 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

$ ls kube-proxy*pem
kube-proxy-key.pemkube-proxy.pem

生成kubeconfig文件：

KUBE_APISERVER="https://192.168.1.147:6443"

kubectl config set-cluster kubernetes \\
--certificate-authority=/opt/kubernetes/ssl/ca.pem \\
--embed-certs=true \\
--server=$KUBE_APISERVER \\
--kubeconfig=kube-proxy.kubeconfig
kubectl config set-credentials kube-proxy \\
--client-certificate=./kube-proxy.pem \\
--client-key=./kube-proxy-key.pem \\
--embed-certs=true \\
--kubeconfig=kube-proxy.kubeconfig
kubectl config set-context default \\
--cluster=kubernetes \\
--user=kube-proxy \\
--kubeconfig=kube-proxy.kubeconfig
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

拷贝到配置文件指定路径：

cp kube-proxy.kubeconfig /opt/kubernetes/cfg/

（4）systemd管理kube-proxy

cat > /usr/lib/systemd/system/kube-proxy.service < < EOF
[Unit]
Description=Kubernetes Proxy
After=network.target
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-proxy.conf
ExecStart=/opt/kubernetes/bin/kube-proxy \\$KUBE_PROXY_OPTS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF

（5）启动并设置开机启动

systemctl daemon-reload
systemctl start kube-proxy
systemctl enable kube-proxy

# 确认状态运行正常
$ systemctl status kube-proxy
● kube-proxy.service - Kubernetes Proxy
Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-01-31 21:00:25 EST; 12s ago
Main PID: 4373 (kube-proxy)
CGroup: /system.slice/kube-proxy.service
└─4373 /opt/kubernetes/bin/kube-proxy --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --config=/opt/kubernetes/c...

Jan 31 21:00:25 k8s-m1 systemd[1]: Started Kubernetes Proxy.
Jan 31 21:00:25 k8s-m1 systemd[1]: Starting Kubernetes Proxy...

7.5 部署CNI网络
（1）准备好CNI二进制文件：

cd ~
wget https://github.com/containernetworking/plugins/releases/download/v0.8.6/cni-plugins-linux-amd64-v0.8.6.tgz

解压二进制包并移动到默认工作目录：

mkdir -p /opt/cni/bin
tar zxvf cni-plugins-linux-amd64-v0.8.6.tgz -C /opt/cni/bin

部署CNI网络，创建kube-flannel.yml：

cat > kube-flannel.yml < < EOF
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
name: psp.flannel.unprivileged
annotations:

推荐阅读

慢性鼻炎的最佳治疗方法慢性鼻炎如何治疗

娱乐|ZEALER AWARDS 2021 教你打造非凡影音娱乐体验

文章整理|文章整理《佛说四十二章经》第十三章

为什么都是符合国标车的品牌,爱玛比新日、绿能的车子价格贵？

如果世界各国为伊朗提供大量军事援助,伊朗能打过美国吗？

华为手机的魔音在哪里

中国地图全景3d，中国地理

用盐刷牙牙齿会变白吗

胃癌|为什么中国人胃癌多？医生忠告：想远离胃癌，4件事要克制！

蛋糕粉可以做馒头吗

任性的嘴唇夜光花

描写风景的佳句

延年益寿药膳—百草脱骨扒鸡

退货的时候千万别选择退运费卖家故意拖到系统自动退款

秋天吃冬枣的好处和坏处

宝宝湿疹如何护理

汽车翻板电机在什么位置汽车翻板电机坏了的表现是什么

新鲜松茸能放冰箱冷冻吗

Android_Button_注册监听

生蚝保存的方法有哪些呢生蚝保存的方法有哪些

##虚机仅主机的网络配置

内存变化趋势perfmon使用

值得你记住并受用一生的Word XP/2003快捷键

我校将进行校园网设备及主干链路升级改造

树莓派学习 2. 开发环境搭建

防火墙基础之华为华三防火墙web页面登录

Docker实战 -- 部署Redis集群与部署微服务项目

CentOS dlib安装

树梅派学习 4. 双色LED实验