arduino|Arduino STM32 JLink下载教程 windows|stm32

1. 准备工作 【arduino|Arduino STM32 JLink下载教程】软件：Setup_JLinkARM_V468.exe，上篇已成功安装的相关软件。
硬件：STM32F1板子（STM32F103ZET6）、JLink OB下载器。
2.软件配置安装“Setup_JLinkARM_V468.exe”，本例安装目录为“D:\Program Files (x86)\SEGGER\JLinkARM_V468\”，安装完成后可以在设备管理器中看到J-Link driver。

文章图片

打开D:\Program Files (x86)\Arduino\hardware\Arduino_STM32\STM32F1\boards.txt文件，在需要使用JLink下载的STM32系列（本例STM32F103ZET6）下添加代码并保存。

genericSTM32F103Z.menu.upload_method.jLinkMethod=JLINK genericSTM32F103Z.menu.upload_method.jLinkMethod.upload.protocol=jlink genericSTM32F103Z.menu.upload_method.jLinkMethod.upload.tool=jlink_upload genericSTM32F103Z.menu.upload_method.jLinkMethod.build.upload_flags=-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG genericSTM32F103Z.menu.upload_method.jLinkMethod.upload.device=STM32F103ZE

文章图片

重新启动Arduino IDE可以看到上载方式增加了“JLINK”项。

文章图片

打开D:\Program Files (x86)\Arduino\hardware\Arduino_STM32\STM32F1\platform.txt文件，添加如下代码并保存，已存在可省略。

tools.jlink_upload.cmd=jlink_upload tools.jlink_upload.cmd.windows=jlink_upload.bat tools.jlink_upload.cmd.macosx=jlink_upload tools.jlink_upload.path={runtime.hardware.path}/tools/win tools.jlink_upload.path.macosx={runtime.hardware.path}/tools/macosx tools.jlink_upload.path.linux={runtime.hardware.path}/tools/linux tools.jlink_upload.path.linux64={runtime.hardware.path}/tools/linux64 tools.jlink_upload.upload.params.verbose=-d tools.jlink_upload.upload.params.quiet=n tools.jlink_upload.upload.pattern="{path}/{cmd}" "{build.path}/{build.project_name}.bin"

文章图片

打开D:\Program Files (x86)\Arduino\hardware\Arduino_STM32\tools\win\jlink_upload.bat文件，添加如下代码并保存。对于不同系列的STM32，需要更改最后一行中对应的“STM32Fxxxxx”。

rem: @echo off rem: Note %~dp0 get path of this batch file rem: Need to change drive if My Documents is on a drive other than C: set driverLetter=%~dp0 set driverLetter=%driverLetter:~0,2% %driverLetter% cd %~dp0 rem: the two line below are needed to fix path issues with incorrect slashes before the bin file name set tmpBinFilePath=%1 set tmpBinFilePath=%tmpBinFilePath:/=\%rem: create commander script file with the tmp bin that the Arduino IDE creates@echo erase > %tmpbinfilepath%.jlink @echo loadbin %tmpbinfilepath% , 0x8000000 >> %tmpbinfilepath%.jlink @echo r >> %tmpbinfilepath%.jlink @echo q >> %tmpbinfilepath%.jlinkjlink\JLink.exe -device STM32F103ZE -if SWD -speed 4000 -CommanderScript %tmpBinFilePath%.jlink

在“D:\Program Files (x86)\Arduino\hardware\Arduino_STM32\tools\win”文件夹下新建文件夹“jlink”，并将JLink安装目录下的“JLink.exe”和“JLinkARM.dll”两个文件拷贝到该文件夹下。