锐客网

  1. 首页 > 睿知 > >

爱普生l390清零错误2000010

经验分享睿知

Introduction
The Epson L390 is a reliable, powerful and versatile all-in-one printer. It is designed to help you quickly and easily print, scan and copy documents with great clarity and detail. However, many users face issues with their Epson L390 printers, such as the ‘Error 2000010’. This error indicates an issue with the device’s printhead and can render your printer useless. Fortunately, there are some easy steps to take to reset your printer and clear this error.
Step 1: Check the Ink Cartridge
The first step is to check the ink cartridge. Check if the ink cartridge is properly installed and if there is ample amount of ink in it. If the ink cartridge is low, replace it and continue to the next step.
Step 2: Check and Clean the Printhead
The second step is to check and clean the printhead. The printhead could be clogged, which can cause the error. To clean the printhead, turn off the printer, remove the ink cartridge and use a cotton swab and warm water to gently clean the printhead. After that, re-install the ink cartridge and turn the printer on.
【爱普生l390清零错误2000010】Step 3: Reset the Printer
The third step is to reset the printer. To reset the printer, turn it off and wait for a few seconds. Then press and hold the ‘Power’ and ‘Reset’ buttons simultaneously for about 10 seconds. When the LED turns green, then release the buttons and turn the printer on.
Step 4: Update the Printer Firmware
The fourth step is to update the printer firmware. Make sure you have the latest version of the printer firmware by checking the Epson website. If it is not the latest version, then download and install the latest version of the firmware.
Step 5: Check Printer Settings
The fifth step is to check the printer settings. Make sure that the printer is set to the default settings, such as paper size, quality, etc. If anything is set to a different value than the default, then change it to the default value.
Conclusion
All these steps can help you reset your Epson L390 printer and clear the ‘Error 2000010’. However, if the error persists even after following all the steps, then it is best to contact an expert for help.

    推荐阅读


    上一篇：爱普生b161b打印机清零软件

    下一篇：爱普生r270连供墨盒清零