锐客网

  1. 首页 > 睿知 > >

爱普生L1390连供清零

经验分享睿知

Epson L1390 (EPL 1390) is a multi-function laser printer, which has the capability to print, copy and scan documents. The printer has a maximum print resolution of 1200×1200 dpi, and can print up to 25 pages per minute. It supports printing on both sides of the paper, and can handle a range of media sizes from A4 to A6. The printer has a network interface via either USB or Ethernet, and can be connected to a computer or a network.
The first step to resetting an Epson L1390 is to power off the printer. Once the printer is powered off, press and hold the “Go” button for 10 seconds, then release it. You will then see a message on the display panel saying “Initializing…” Once that is done, you should see “Current IP Address” displayed.
The next step is to disconnect the printer from the computer or network and then plug in the Ethernet cable and USB cable. After doing this, turn the printer on, and wait until the printer has powered up. Then press the “Go” button once more, and you will see a message on the display panel saying “Please enter the new IP address”.
【爱普生L1390连供清零】Type in the new IP address and press the “Enter” button. The printer will now be reset and will have the new IP address. This can be easily verified by printing a test page.
To clear the paper jam, open the scanner cover and locate the paper path. Carefully remove any paper from the path, and then close the scanner cover. If there is still a jam present, try to manually remove the paper by holding the two sides of the paper and gently pulling it out. If this doesn’t work, press the “Go” button once more to reset the printer and try again.
Finally, you can reset the printer to its factory settings by pressing and holding the “Go” button for 8 seconds, and then pressing the “Enter” button. This should clear all data and configurations on the printer.
In conclusion, resetting the Epson L1390 is a fairly simple process. It requires few steps, and is relatively easy to accomplish. The process entails powering off the printer, disconnecting the cables, entering a new IP address and clearing the paper jams. Once these steps have been completed, the printer should be able to reset back to its factory settings.

    推荐阅读


    上一篇：爱普生打印机怎么外接废墨

    下一篇：爱普生7621废墨