锐客网

  1. 首页 > 睿知 > >

l800爱普生废墨收集垫清洗

经验分享睿知

AiPuSheng (Epson) toner waste collection pad cleaning
【l800爱普生废墨收集垫清洗】1、确保环境清洁：将收集废墨的容器置于清洁的平坦表面 。
Ensure a clean environment: Place the container for collecting the waste toner on a clean flat surface.
2、清洗废墨垫：将废墨垫放入洗衣机中，按“洗衣机清洗”或“洗碗”程序 ， 用温水清洗，待表面干燥后可复用 。
Clean the waste toner pad: Put the waste toner pad into the washing machine, press the “Washing Machine Cleaning” or “Dishwashing” program, rinse with warm water, and reuse after the surface is dry.
3、可清洗普通型复印机墨粉垫：将硬底垫放入热水中，放入一定量的肥皂粉，浸泡半小时，用手轻轻搓揉，将废墨洗去 ， 再将垫放入冷水清洗，切记不要将垫用力拧擦，以免损坏 。
Ordinary type copier toner pads can be cleaned: Put the hard bottom pad into hot water, put in a certain amount of soap powder, soak for half an hour, rub gently with your hands to wash away the waste ink, and then put the pad into cold water to clean, remember not to twist and rub the pad forcefully, so as not to damage it.
4、清洗硬型复印机墨粉垫：将硬型复印机墨粉垫放入洗衣粉中浸泡半小时，然后用中等温水冲洗，将清洗后的垫放入温水中浸泡，放入少量洗衣粉，搓洗直至洗洁，最后把垫放入冷水中清洗，再放入干燥处复用 。
Clean the hard type copier toner pad: Put the hard type copier toner pad in the washing powder to soak for half an hour, then rinse with moderate temperature water, put the cleaned pad into warm water to soak, put in a small amount of washing powder, rub until clean, and finally put the pad into cold water to clean, and then put it in the drying place for reuse.
5、其他复印机废墨垫清洗：为了不损坏复印机墨粉垫的特殊结构，复印机用户可根据复印机型号的清洗说明书，将废墨垫放入清洗液中清洗，再放入干燥处复用 。
Other copier waste toner pad cleaning: In order not to damage the special structure of the copier toner pad, the copier users can clean the waste toner pad in the cleaning solution according to the cleaning instructions of the copier model, and then put it in the drying place for reuse.

    推荐阅读


    上一篇：爱普生废墨收集垫多久换一次啊

    下一篇：爱普生按键清零