锐客网

  1. 首页 > 睿知 > >

爱普生1390清零error

经验分享睿知

Epson 1390 Printer is a popular high-end device that is used for both home andoffice purposes. It has the capability of printing high-resolution images anddocuments with quality that is considered to be near-professional quality. However,like any other device, it may occasionally encounter errors. One of the mostcommon errors encountered with the Epson 1390 Printer is Error 700.
Error 700 is a general-purpose error code that occurs when the printer fails torecognize the instructions being sent to it. It can be caused due to several factorsincluding connectivity or driver issues, or if the cartridge is empty or damaged.To resolve the error 700 in an Epson 1390 Printer, the following steps should beperformed:
1. Check the printer cable connection and make sure it is firmly connected to thePC or any other device it is connected to.
2. Unplug the printer from its power source and reconnect it making sure it isplugged in firmly.
3. Check if the cartridge is empty or damaged. If it is, replace it with a newone.
4. Check if the printer driver is outdated or corrupt and if it is, update orreinstall the printer driver.
5. Reset the printer to its factory settings. To do this, press and hold the‘Power’ button for about 10 seconds. Then hit the ‘Reset’ button and then releasethe ‘Power’ button.
6. Lastly, try printing a test page to check if the issue is fixed.
【爱普生1390清零error】By following these steps, the Epson 1390 Printer’s Error 700 should be resolvable.However, if it persists even after these steps have been followed, it is advised tocontact a professional to take a look at the printer.

    推荐阅读


    上一篇：爱普生725清零

    下一篇：爱普生4167固件更新