锐客网

  1. 首页 > 生活百科 > >

爱普生r230清零英文版

经验分享生活百科

左右
Introduction
In most cases, the Epson R230 will need to be reset if some problems occur. This article will guide you through the process of resetting your Epson R230 printer.
Step 1: Unplug the power cord
Unplug the power cord from the printer. This will cut the power supply to the printer.
Step 2: Open the control panel
Open the control panel at the back of the printer. You should see a small green button.
Step 3: Press the green button
Press the small green button for around 5-10 seconds. This will initiate the reset process.
Step 4: Plug in the power cord
Plug the power cord back into the printer. When you do this, the reset process will complete.
Step 5: Check the display
The display should now indicate that the reset process was successful. If it does not, then repeat the process from Step 1.
Conclusion
Resetting your Epson R230 printer is a relatively straightforward process. All you need to do is open the control panel, press the small green button, and then plug in the power cord. Once the reset process has been completed, the display should indicate that the reset was successful.
【爱普生r230清零英文版】If the display does not indicate that the reset was successful, then you will need to repeat the process from Step 1.

    推荐阅读


    上一篇：爱普生固件升级失败怎么办

    下一篇：爱普生喷墨机怎么清零