锐客网

  1. 首页 > 睿知 > >

爱普生软件清零英文

经验分享睿知

1. Requirements
Before resetting your Epson Printer software, make sure that you have the following items:
A. Epson Printer software
B. Computer with an internet connection
C. USB cable
2. Preparation
1. Make sure that your printer is powered off.
2. Unplug the power cable and USB cable from the printer.
3. Unplug all other cables from the printer.
4. Remove any cartridges and other accessories from the printer.
3. Resetting the Printer Software
1. Download the Epson Printer software from the official website and install it on your computer.
2. Connect the printer to the computer using the USB cable.
3. Open the Epson Printer software and select “Reset Software” from the list of options.
【爱普生软件清零英文】4. The printer will prompt you to confirm that you want to reset the software. Select “Yes” to proceed.
5. The reset process will take some time to complete. The printer will notify you when the reset has been finished.
4. Cleaning Your Printer
1. Disconnect the USB cable from the printer.
2. Wipe down the exterior of the printer with a damp cloth.
3. Clean the printer head using a cotton swab.
4. Check for any jams or obstructions inside the printer.
5. Plug the power and USB cable back in and turn on the printer.
5. Final Steps
1. Connect the printer to your computer and open the Epson Printer software.
2. Select “Options” from the bottom left corner of the window.
3. Select “Reset Software” once again.
4. Follow the on-screen instructions to complete the reset process.
5. Your printer will now be reset and ready to use.

    推荐阅读


    上一篇：爱普生11880c清零

    下一篇：爱普生620f废墨收集