锐客网

  1. 首页 > 睿知 > >

爱普生 废墨盒清零

经验分享睿知

Epson Waste Ink Pad Reset
Epson Waste Ink Pad Reset is a method used to reset the internal ink pads on an Epson printer. This procedure is necessary in order to ensure that your printer is functioning optimally and avoid any potential problems that could be caused if the ink pads become full. This procedure is relatively simple, but it should be done with caution as there is a possibility of damaging the printer if not done correctly.
【爱普生 废墨盒清零】The first step of the reset procedure is to identify the Epson Waste Ink Pad. Most Epson printers have their waste ink pads either located under the control panel or behind the printer. Once you have identified the Waste Ink Pad, then you will need to remove it. It is usually held in place by screws or clips, so you will need to unscrew or unclip it to remove it. Once the Waste Ink Pad is removed, you will need to gently clean it with a paper towel or lint free cloth to remove any dust or dirt that may have accumulated on it.
After the Waste Ink Pad has been removed and cleaned, you will then need to reset the internal counters. This can be done by selecting the “Reset” option from the printer’s menu. After the reset has been completed, the Waste Ink Pad should be reinserted into its original position. Finally, you should run a test print to make sure that everything is functioning correctly.
As mentioned before, this reset procedure should be done with caution. Mistakes made during the reset could potentially damage the printer, so it is important to follow the instructions carefully. Additionally, this procedure should not be done frequently, as it can cause the printer’s internal components to wear out more quickly. If you are uncomfortable attempting this procedure yourself, then it is recommended to seek the help of a qualified technician.

    推荐阅读


    上一篇：爱普生维护箱t04d1

    下一篇：爱普生清零时间调整