锐客网

  1. 首页 > 睿知 > >

爱普生m101废墨垫清零

经验分享睿知

A. Preparations for the resetting of EPSON M101 ink pad
1. Prepare the materials: a towel, a few pieces of paper towels, a pair of gloves, a utility knife (remember to wear gloves when using the utility knife).
2. Before resetting, it is necessary to remove the ink cartridge from the bottom of the EPSON M101 printer.
3. Put a towel on the bottom of the printer to avoid crumbs or other dirt falling down.
4. Open the top cover of the printer and use a utility knife to slowly cut off the screw on the ink pad cover.
5. Open the ink pad cover and take out the ink pad.
6. Use the paper towel to wipe the surface of the ink pad clean.
7. Take a new ink pad and insert it into the printer.
8. Tighten the screw of the ink pad cover and close the top cover.
9. Put the ink cartridge back into the printer.
B. Resetting the EPSON M101 Ink Pad
1.Turn on the printer and open the printer’s control panel.
2. Go to the “Maintenance” section and then click “Ink Pad Reset”.
3. Press the “Start” button to start the resetting process.
4. Wait for the resetting process to finish and then turn off the printer.
5. Restart the printer and try to print a test page to check if the resetting is successful.
C. Conclusion
【爱普生m101废墨垫清零】Through the above steps, we can reset the EPSON M101 ink pad. Before resetting, we need to prepare the materials and remove the ink cartridge. The resetting process is easy and only takes a few minutes. After resetting, we need to restart the printer and print a test page. If the test page is printed successfully, it means that the resetting is successful.

    推荐阅读


    上一篇：airpods 2023推出，苹果airpods2什么时候发布

    下一篇：如何筛选爱普生清零软件