锐客网

  1. 首页 > 睿知 > >

佳能废墨收集器清零

经验分享睿知

【佳能废墨收集器清零】Canon waste ink collector resetting is an important process during the operation and maintenance of a Canon printer. This process should be performed when the printer notifies you that the waste ink collector is full. It is important to note that resetting the collector will not solve any issue with your printer and that it should only be done when it is full.
Firstly, turn off your printer and unplug its power cable. Open the printer’s cover and locate the waste ink collector, which is usually located to the right of the carriage. To reset the waste ink collector, you may be required to remove a few screws from the printer’s housing.
Once the screws are removed, use a damp rag to clean the waste ink collector. Make sure to remove any ink or debris that could be clogging the collector. After cleaning the collector, you can then refill it with specific ink. Again, make sure to clean away any excess ink that could be dripping out of the collector.
Once the waste ink collector has been refilled, plug in the power cable to the printer and turn it on. You may now need to reset the collector. To do this, open the printer’s settings and select the “Reset” option. This will reset the waste ink collector counter and the printer will be ready for use again.
It is important to note that resetting the waste ink collector will not necessarily solve any issue with your printer. Therefore, it is important to address any other issue that may be causing your printer to malfunction. Regular maintenance and cleaning is recommended to ensure your printer is running properly.

    推荐阅读


    上一篇：佳能 废墨垫 裁剪教程图解

    下一篇：佳能打印机怎样清零复位设置