锐客网

  1. 首页 > 睿知 > >

ip2800 错误5b00

经验分享睿知

【ip2800 错误5b00】Error 5B00 is a Canon printer error message that appears when a specific waste ink absorber needs to be replaced. It is a common problem encountered with Canon Pixma MP series printers. Waste ink absorbers are used to collect and contain excessive amounts of ink that is generated during the printer cleaning process, and once it has reached its capacity, it needs to be replaced.
Step 1
Turn off your Canon printer. Unplug the power cord and all other cables connected to the printer.
Step 2
Carefully open the printer’s cover. See your printer’s manual or the manufacturer’s website for specific instructions.
Step 3
Locate the waste ink absorber located at the bottom of the printer. It is usually either a rectangular sponge or a pad.
Step 4
Remove the waste ink absorber by first unplugging it, then carefully pulling it out of the printer. Take caution not to get ink on your hands and clothes.
Step 5
Replace the waste ink absorber with a new one. Make sure that it is firmly in place.
Step 6
Close the printer’s cover and plug in the power cord.
Step 7
Turn the printer on and try printing a test page. If the error message does not reappear, then the problem has been solved.
If the error message continues to appear, then further troubleshooting may be necessary. Make sure that all the cables are securely connected, and that all ink cartridges are properly installed. If the problem persists, then contact the manufacturer or a technician to help resolve the issue.

    推荐阅读


    上一篇：佳能废墨垫清零教程图解大全视频

    下一篇：佳能2780手动清理废墨