MEF and AppDomainz _domain

【MEF and AppDomainz】冲天香阵透长安，满城尽带黄金甲。这篇文章主要讲述MEF and AppDomainz相关的知识，希望能为你提供帮助。
MEF and AppDomain - Remove Assemblies On The Fly
This article will give an idea of what‘s involved in interacting with a running MEF based application and how to either remove a Composition part or replace it with a new version, without having to shut down your application for an upgrade of a part. This can be particularly useful when replacing or removing components from a Windows service that is MEF based and has an administration component to interact with the service.

The question came up last week about swapping out an MEF enabled DLL on the fly. Because .NET locks the assembly even in an MEF enabled application, you can‘t replace the DLL when you release the MEF parts in your code. The only way to replace a DLL without a little elbow grease, is to shut down the application, swap out the DLL, and then restart the application. So, after researching and finding a couple of decent examples and after applying the elbow grease, I came up with this solution. It‘s not pretty and it doesn‘t do much except prove how to do this. This is a copy of my Code Project article of the same title.

This example will only work with .NET 4.5 and above and assumes you already have an understanding of how MEF works and can get around with it without going into a tutorial on that.

We will be using the AppDomainclass to create an application domain for the MEF components to run in.This will allow us to access the components at run time. I‘ll explainmore of what‘s going on as we progress.

First, create a console application project called AppDomainTest. And in your Program class. I have a couple of paths set up here that point to where the MEF DLLs are found and where the AppDomainSetup will cache the DLLs while running. I‘ll explain more of that later.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

using System; using System.IO; namespace AppDomainTest { internal class Program { private static AppDomain domain; [STAThread] private static void Main() { var cachePath = Path.Combine(AppDomain.CurrentDomain.SetupInformation.ApplicationBase, "ShadowCopyCache"); var pluginPath = Path.Combine(AppDomain.CurrentDomain.SetupInformation.ApplicationBase, "Plugins"); if (!Directory.Exists(cachePath)) { Directory.CreateDirectory(cachePath); }if (!Directory.Exists(pluginPath)) { Directory.CreateDirectory(pluginPath); }// This creates a ShadowCopy of the MEF DLL‘s (and any other DLL‘s in the ShadowCopyDirectories) var setup = new AppDomainSetup { CachePath = cachePath, ShadowCopyFiles = "true", ShadowCopyDirectories = pluginPath }; } } }

Now, create a class library project called AppDomainTestInterfaces. This library will contain the contract interface for the MEF libraries and the main application. Add a reference to this library in the main application. Delete the class file in there and create an interface called IExport.

1 2 3 4 5 6 7

namespace AppDomainTestInterfaces { public interface IExport {void InHere(); } }

Next, create a couple of MEF class library projects. Add references to AppDomainTestInterfaces and System.ComponentModel.Composition in each library.

You‘ll want to set the build output to the bindebug folder for the main application as shown. I put the compiled DLLs into a folder called Plugins under the main application binDebug folder so that they were easy to find and I could set up my code to be simple for this example. Use your own folder as needed.

文章图片

Finally, create a class library project called AppDomainTestRunner and set a reference to it in the main application. Add references to System.ComponentModel.Composition, System.ComponentModel.Composition.Registration, and System.Reflection.Context to add access to the necessary MEF components used in the rest of the example. And lastly, add a reference to AppDomainTestInterfaces.

Now we can get to the meat of this project.

In the AppDomainTestRunnerlibrary project, delete the Class1file and add a Runnerclass. This is the class that will deal with the MEF imports and exports, and we will see that the entire class runs in a separate AppDomain.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

using System; using System.Collections.Generic; using System.ComponentModel.Composition; using System.ComponentModel.Composition.Hosting; using System.ComponentModel.Composition.Registration; using System.IO; using System.Linq; using AppDomainTestInterfaces; namespace AppDomainTestRunner { public class Runner : MarshalByRefObject { private CompositionContainer container; private DirectoryCatalog directoryCatalog; private IEnumerable< IExport> exports; private static readonly string pluginPath = Path.Combine(AppDomain.CurrentDomain.SetupInformation.ApplicationBase, "Plugins"); public void DoWorkInShadowCopiedDomain() { // Use RegistrationBuilder to set up our MEF parts. var regBuilder = new RegistrationBuilder(); regBuilder.ForTypesDerivedFrom< IExport> ().Export< IExport> (); var catalog = new AggregateCatalog(); catalog.Catalogs.Add(new AssemblyCatalog(typeof(Runner).Assembly, regBuilder)); directoryCatalog = new DirectoryCatalog(pluginPath, regBuilder); catalog.Catalogs.Add(directoryCatalog); container = new CompositionContainer(catalog); container.ComposeExportedValue(container); // Get our exports available to the rest of Program. exports = container.GetExportedValues< IExport> (); Console.WriteLine("{0} exports in AppDomain {1}", exports.Count(), AppDomain.CurrentDomain.FriendlyName); }public void Recompose() { // Gimme 3 steps... directoryCatalog.Refresh(); container.ComposeParts(directoryCatalog.Parts); exports = container.GetExportedValues< IExport> (); }public void DoSomething() { // Tell our MEF parts to do something. exports.ToList().ForEach(e => e.InHere(); ); } } }

Next, set up the MEF library code as shown below. This just shows that we actually are running in the DLLs. I created two of the exact same libraries, just naming the second AppDomainTestLib2.

1 2 3 4 5 6 7 8 9 10 11 12 13

using System; using AppDomainTestInterfaces; namespace AppDomainTestLib { public class Import : MarshalByRefObject, IExport {public void InHere() { Console.WriteLine("In MEF library2: AppDomain: {0}", AppDomain.CurrentDomain.FriendlyName); } } }

Note the use of MarshalByRefObject, this will, in essence, mark this class as Serializableand enables access to objects across AppDomain boundaries, therebygaining necessary access to methods and properties in the class residingin the hosted AppDomain.

Finally, set up the Main() method as follows. What we see here is the use of an AppDomainSetup object to define our AppDomain configuration. This establishes the shadow copying of the DLLs and where to shadow copy to. The CachePath parameter is optional, and only shown here as proof of what is happening. The parameter ShadowCopyFiles is a string parameter and accepts "true" or "false". The ShadowCopyDirectories parameter establishes which directory to shadow copy from.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

51

52

53

54

using System; using System.IO; using AppDomainTestRunner; namespace AppDomainTest { internal class Program { private static AppDomain domain; [STAThread] private static void Main() { var cachePath = Path.Combine(AppDomain.CurrentDomain.SetupInformation.ApplicationBase, "ShadowCopyCache"); var pluginPath = Path.Combine(AppDomain.CurrentDomain.SetupInformation.ApplicationBase, "Plugins"); if (!Directory.Exists(cachePath)) { Directory.CreateDirectory(cachePath); }if (!Directory.Exists(pluginPath)) { Directory.CreateDirectory(pluginPath); }// This creates a ShadowCopy of the MEF DLL‘s (and any other DLL‘s in the ShadowCopyDirectories) var setup = new AppDomainSetup { CachePath = cachePath, ShadowCopyFiles = "true", ShadowCopyDirectories = pluginPath }; // Create a new AppDomain then create an new instance of this application in the new AppDomain. // This bypasses the Main method as it‘s not executing it. domain = AppDomain.CreateDomain("Host_AppDomain", AppDomain.CurrentDomain.Evidence, setup); var runner = (Runner)domain.CreateInstanceAndUnwrap(typeof(Runner).Assembly.FullName, typeof(Runner).FullName); Console.WriteLine("The main AppDomain is: {0}", AppDomain.CurrentDomain.FriendlyName); // We now have access to all the methods and properties of Program. runner.DoWorkInShadowCopiedDomain(); runner.DoSomething(); Console.WriteLine(" Here you can remove a DLL from the Plugins folder."); Console.WriteLine("Press any key when ready..."); Console.ReadKey(); // After removing a DLL, we can now recompose the MEF parts and see that the removed DLL is no longer accessed. runner.Recompose(); runner.DoSomething(); Console.WriteLine("Press any key when ready..."); Console.ReadKey(); // Clean up. AppDomain.Unload(domain); } } }

About shadow copying: ShadowCopyFiles will take a copy of the DLLs that are actually used in the AppDomain and put them in a special folder then reference them from there. This allows the DLL in the Plugins (or any other configured folder) to be deleted or replaced during runtime. The original DLL will remain in the folder until either the next startup of the application or, in the example we will see, the DirectoryCatalog is refreshed and the CompositionContainer is recomposed and re-exported.

Now, when you run the application, you see the MEF DLLs run and within "Host_AppDomain".

文章图片

At this point, you can go into the Plugins folder and delete a DLL then press any key in the console window to see what happens when runner.Recompose() is called. We then get proof that the recompose released our DLL, but only because of the ShadowCopyFiles parameter.

文章图片

Now, open another instance of Visual Studio and create a class library called AppDomainTestLib3. Add the same references as before and don‘t set the output directory, we‘ll want to copy that in by hand. Set up its Import class code just the same as the previous AppDomainTestLib classes. Go ahead and compile it.

Next, run the application in the previous Visual Studio instance and stop at the first Console.ReadKey(). Delete a DLL from the Plugins folder and copy the new one in place. Press any key to continue...

文章图片

Pretty cool, eh?

Finally, to actually replace a DLL, you must delete the previous DLL prior to implementing the new one. We can demonstrate the manual way of doing this by inserting the following code into Program.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

// After removing a DLL, we can now recompose the MEF parts and see that the removed DLL is no longer accessed. runner.Recompose(); runner.DoSomething(); Console.WriteLine(" Here we will begin to replace Lib3 with an updated version. Delete the old one first DLL from the Plugins folder."); Console.WriteLine("Press any key when ready..."); Console.ReadKey(); Console.WriteLine("Now showing that Lib3 is deleted."); runner.Recompose(); runner.DoSomething(); Console.WriteLine(" Next drop the new Lib3 in the Plugins folder."); Console.WriteLine("Press any key when ready..."); Console.ReadKey(); runner.Recompose(); runner.DoSomething(); Console.WriteLine("Press any key when ready..."); Console.ReadKey(); // Clean up. AppDomain.Unload(domain);

Leave the current AppDomainTestLib3 in the Plugins folder and run the application. Now, follow the prompts and when you get to "Here we will begin to replace Lib3 with an updated version.", make an observable change to the AppDomainTestLib3 and compile it. After completing the deletion of the old DLL, press any key to recompose the DLLs. Now, when you get the next prompt, drop the new DLL into the Plugins folder. Hit any key as usual. You should now see the response from your changed DLL.

The reason for the double runner.Recompose()calls is that the Exports signature for the DLL matches the previous version and MEF doesn‘t see a change since it doesn‘t look at FileInfo for differences. This then tells the AppDomain that the DLL hasn‘t changed either and the ShadowCopyFiles doesn‘t kick in to make that change. The simple work around is to delete the original, recompose, put the new one in place, and recompose one more time. The only disadvantage I can see in this is the performance of the application will drop momentarily during the recompose.

I‘ve added a Github repository with the source. I also included in that source the ability to pass data between AppDomains. The source can be downloaded from http://github.com/johnmbaughman/MEFInAnAppDomain.