深层剖析鸿蒙轻内核M核的动态内存如何支持多段非连续性内存 _内存

亦余心之所善兮，虽九死其犹未悔。这篇文章主要讲述深层剖析鸿蒙轻内核M核的动态内存如何支持多段非连续性内存相关的知识，希望能为你提供帮助。
本文分享自华为云社区《鸿蒙轻内核M核源码分析系列九动态内存Dynamic Memory 补充》，作者：zhushy。
一些芯片片内RAM大小无法满足要求，需要使用片外物理内存进行扩充。对于多段非连续性内存，需要内存管理模块统一管理，应用使用内存接口时不需要关注内存分配属于哪块物理内存，不感知多块内存。
多段非连续性内存如下图所示：

文章图片

鸿蒙轻内核M核新增支持了多段非连续性内存区域，把多个非连续性内存逻辑上合一，用户不感知底层的不同内存块。本文来分析下动态内存模块的支持多段非连续内存的源码，帮助读者掌握其使用。本文中所涉及的源码，以OpenHarmony LiteOS-M内核为例，均可以在开源站点https://gitee.com/openharmony/kernel_liteos_m 获取。接下来，我们看下新增的结构体、宏和对外接口的源代码。
1、结构体定义和常用宏定义在文件kernel/include/los_memory.h中新增了结构体LosMemRegion用于维护多个非连续的内存区域，包含各个内存区域的开始地址和大小。如下：

typedef struct { VOID *startAddress; /* 内存区域的开始地址 */ UINT32 length; /* 内存区域的长度 */ } LosMemRegion;

需要注意这个结构体的定义需要开启宏LOSCFG_MEM_MUL_REGIONS的情况下才生效，这个宏也是支持非连续内存区域的配置宏，定义在文件kernel/include/los_config.h中。
我们继续看下新增的几个宏函数，定义在文件kernel/src/mm/los_memory.c，代码下下文:
注释讲的比较明白，当开启LOSCFG_MEM_MUL_REGIONS支持非连续内存特性时，会把两个不连续内存区域之间的间隔Gap区域标记为虚拟的已使用内存节点。这个节点当然不能被释放，在内存调测特性中也不能被统计。因为我们只是把它视为已使用内存节点，但其实不是。在动态内存算法中每个内存节点都维护一个指向前序节点的指针，对于虚拟已使用节点，我们把该指针设置为魔术字，来标记它是个内存区域的间隔部分。
⑴处定义了一个魔术字OS_MEM_GAP_NODE_MAGIC，用于表示两个不连续内存区域之前的间隔Gap区域。⑵和⑶处定义2个宏，分别用于设置魔术字，验证魔术字。

#if (LOSCFG_MEM_MUL_REGIONS == 1) /** *When LOSCFG_MEM_MUL_REGIONS is enabled to support multiple non-continuous memory regions, the gap between two memory regions *is marked as a used OsMemNodeHead node. The gap node could not be freed, and would also be skipped in some DFX functions. The *\'ptr.prev\' pointer of this node is set to OS_MEM_GAP_NODE_MAGIC to identify that this is a gap node. */ ⑴#define OS_MEM_GAP_NODE_MAGIC0xDCBAABCD ⑵#define OS_MEM_MARK_GAP_NODE(node)(((struct OsMemNodeHead *)(node))-> ptr.prev = (struct OsMemNodeHead *)OS_MEM_GAP_NODE_MAGIC) ⑶#define OS_MEM_IS_GAP_NODE(node)(((struct OsMemNodeHead *)(node))-> ptr.prev == (struct OsMemNodeHead *)OS_MEM_GAP_NODE_MAGIC) #else ⑵#define OS_MEM_MARK_GAP_NODE(node) ⑶#define OS_MEM_IS_GAP_NODE(node)FALSE #endif

2、动态内存常用操作本节我们一起分析下非连续性内存的实现算法，及接口实现代码。首先通过示意图了解下算法：

文章图片

集合示意图，我们了解下非连续性内存合并为一个内存池的步骤：
1、把多段内存区域的第一块内存区域调用LOS_MemInit进行初始化
2、获取下一个内存区域的开始地址和长度，计算该内存区域和上一块内存区域的间隔大小gapSize。
3、把内存块间隔部分视为虚拟的已使用节点，使用上一内存块的尾节点，设置其大小为gapSize+ OS_MEM_NODE_HEAD_SIZE。
4、把当前内存区域划分为一个空闲内存块和一个尾节点，把空闲内存块插入到空闲链表。并设置各个节点的前后链接关系。
5、有更多的非连续内存块，重复上述步骤2-4。
2.1 新增接口LOS_MemRegionsAdd
新增的接口的接口说明文档见下文，注释比较详细，总结如下：

LOSCFG_MEM_MUL_REGIONS=0：

不支持多段非连续内存，相关代码不使能。

LOSCFG_MEM_MUL_REGIONS=1：

支持多段非连续内存，相关代码使能。用户配置多段内存区域，调用接口LOS_MemRegionsAdd(VOID *pool, const LosMemRegion * const multipleMemRegions)进行内存池合一：
如果pool为空，则合并到主内存堆m_aucSysMem0。
如果不为空，则初始化一个新的内存池，合并多内存区域为一个从堆。

/** * @ingroup los_memory * @brief Initialize multiple non-continuous memory regions. * * @par Description: * < ul> * < li> This API is used to initialize multiple non-continuous memory regions. If the starting address of a pool is specified, *the memory regions will be linked to the pool as free nodes. Otherwise, the first memory region will be initialized as a *new pool, and the rest regions will be linked as free nodes to the new pool.< /li> * < /ul> * * @attention * < ul> * < li> If the starting address of a memory pool is specified, the start address of the non-continuous memory regions should be *greater than the end address of the memory pool.< /li> * < li> The multiple non-continuous memory regions shouldn\'t conflict with each other.< /li> * < /ul> * * @param pool[IN] The memory pool address. If NULL is specified, the start address of first memory region will be *initialized as the memory pool address. If not NULL, it should be a valid address of a memory pool. * @param memRegions[IN] The LosMemRegion array that contains multiple non-continuous memory regions. The start address *of the memory regions are placed in ascending order. * @param memRegionCount [IN] The count of non-continuous memory regions, and it should be the length of the LosMemRegion array. * * @retval #LOS_NOKThe multiple non-continuous memory regions fails to be initialized. * @retval #LOS_OKThe multiple non-continuous memory regions is initialized successfully. * @par Dependency: * < ul> * < li> los_memory.h: the header file that contains the API declaration.< /li> * < /ul> * @see None. */ extern UINT32 LOS_MemRegionsAdd(VOID *pool, const LosMemRegion * const memRegions, UINT32 memRegionCount);

2.2 新增接口LOS_MemRegionsAdd实现
结合上文示意图，加上注释，实现比较清晰，直接阅读下代码即可。

#if (LOSCFG_MEM_MUL_REGIONS == 1) STATIC INLINE UINT32 OsMemMulRegionsParamCheck(VOID *pool, const LosMemRegion * const memRegions, UINT32 memRegionCount) { const LosMemRegion *memRegion = NULL; VOID *lastStartAddress = NULL; VOID *curStartAddress = NULL; UINT32 lastLength; UINT32 curLength; UINT32 regionCount; if ((pool != NULL) & & (((struct OsMemPoolHead *)pool)-> info.pool != pool)) { PRINT_ERR("wrong mem pool addr: %p, func: %s, line: %d\\n", pool, __FUNCTION__, __LINE__); return LOS_NOK; }if (pool != NULL) { lastStartAddress = pool; lastLength = ((struct OsMemPoolHead *)pool)-> info.totalSize; }memRegion = memRegions; regionCount = 0; while (regionCount < memRegionCount) { curStartAddress = memRegion-> startAddress; curLength = memRegion-> length; if ((curStartAddress == NULL) || (curLength == 0)) { PRINT_ERR("Memory address or length configured wrongly:address:0x%x, the length:0x%x\\n", (UINTPTR)curStartAddress, curLength); return LOS_NOK; } if (((UINTPTR)curStartAddress & (OS_MEM_ALIGN_SIZE - 1)) || (curLength & (OS_MEM_ALIGN_SIZE - 1))) { PRINT_ERR("Memory address or length configured not aligned:address:0x%x, the length:0x%x, alignsize:%d\\n", \\ (UINTPTR)curStartAddress, curLength, OS_MEM_ALIGN_SIZE); return LOS_NOK; } if ((lastStartAddress != NULL) & & (((UINT8 *)lastStartAddress + lastLength) > = (UINT8 *)curStartAddress)) { PRINT_ERR("Memory regions overlapped, the last start address:0x%x, the length:0x%x, the current start address:0x%x\\n", \\ (UINTPTR)lastStartAddress, lastLength, (UINTPTR)curStartAddress); return LOS_NOK; } memRegion++; regionCount++; lastStartAddress = curStartAddress; lastLength = curLength; } return LOS_OK; }STATIC INLINE VOID OsMemMulRegionsLink(struct OsMemPoolHead *poolHead, VOID *lastStartAddress, UINT32 lastLength, struct OsMemNodeHead *lastEndNode, const LosMemRegion *memRegion) { UINT32 curLength; UINT32 gapSize; struct OsMemNodeHead *curEndNode = NULL; struct OsMemNodeHead *curFreeNode = NULL; VOID *curStartAddress = NULL; curStartAddress = memRegion-> startAddress; curLength = memRegion-> length; // mark the gap between two regions as one used node gapSize = (UINT8 *)(curStartAddress) - ((UINT8 *)(lastStartAddress) + lastLength); lastEndNode-> sizeAndFlag = gapSize + OS_MEM_NODE_HEAD_SIZE; OS_MEM_SET_MAGIC(lastEndNode); OS_MEM_NODE_SET_USED_FLAG(lastEndNode-> sizeAndFlag); // mark the gap node with magic number OS_MEM_MARK_GAP_NODE(lastEndNode); poolHead-> info.totalSize += (curLength + gapSize); poolHead-> info.totalGapSize += gapSize; curFreeNode = (struct OsMemNodeHead *)curStartAddress; curFreeNode-> sizeAndFlag = curLength - OS_MEM_NODE_HEAD_SIZE; curFreeNode-> ptr.prev = lastEndNode; OS_MEM_SET_MAGIC(curFreeNode); OsMemFreeNodeAdd(poolHead, (struct OsMemFreeNodeHead *)curFreeNode); curEndNode = OS_MEM_END_NODE(curStartAddress, curLength); curEndNode-> sizeAndFlag = 0; curEndNode-> ptr.prev = curFreeNode; OS_MEM_SET_MAGIC(curEndNode); OS_MEM_NODE_SET_USED_FLAG(curEndNode-> sizeAndFlag); #if (LOSCFG_MEM_WATERLINE == 1) poolHead-> info.curUsedSize += OS_MEM_NODE_HEAD_SIZE; poolHead-> info.waterLine = poolHead-> info.curUsedSize; #endif }UINT32 LOS_MemRegionsAdd(VOID *pool, const LosMemRegion *const memRegions, UINT32 memRegionCount) { UINT32 ret; UINT32 lastLength; UINT32 curLength; UINT32 regionCount; struct OsMemPoolHead *poolHead = NULL; struct OsMemNodeHead *lastEndNode = NULL; struct OsMemNodeHead *firstFreeNode = NULL; const LosMemRegion *memRegion = NULL; VOID *lastStartAddress = NULL; VOID *curStartAddress = NULL; ret = OsMemMulRegionsParamCheck(pool, memRegions, memRegionCount); if (ret != LOS_OK) { return ret; }memRegion = memRegions; regionCount = 0; if (pool != NULL) { // add the memory regions to the specified memory pool poolHead = (struct OsMemPoolHead *)pool; lastStartAddress = pool; lastLength = poolHead-> info.totalSize; } else { // initialize the memory pool with the first memory region lastStartAddress = memRegion-> startAddress; lastLength = memRegion-> length; poolHead = (struct OsMemPoolHead *)lastStartAddress; ret = LOS_MemInit(lastStartAddress, lastLength); if (ret != LOS_OK) { return ret; } memRegion++; regionCount++; }firstFreeNode = OS_MEM_FIRST_NODE(lastStartAddress); lastEndNode = OS_MEM_END_NODE(lastStartAddress, lastLength); while (regionCount < memRegionCount) { // traverse the rest memory regions, and initialize them as free nodes and link together curStartAddress = memRegion-> startAddress; curLength = memRegion-> length; OsMemMulRegionsLink(poolHead, lastStartAddress, lastLength, lastEndNode, memRegion); lastStartAddress = curStartAddress; lastLength = curLength; lastEndNode = OS_MEM_END_NODE(curStartAddress, curLength); memRegion++; regionCount++; }firstFreeNode-> ptr.prev = lastEndNode; return ret; } #endif

小结本文带领大家一起剖析了鸿蒙轻内核M核的动态内存如何支持多段非连续性内存，包含结构体、运作示意图、新增接口等等。感谢阅读，如有任何问题、建议，都可以留言评论，谢谢。
更多学习内容，请关注IoT物联网社区，添加华为云IoT小助手微信号（hwc-iot），获取更多资讯

点击关注，第一时间了解华为云新鲜技术~
【深层剖析鸿蒙轻内核M核的动态内存如何支持多段非连续性内存】