- 首页 > it技术 > >
mac终端下修改MySQL的编码格式--找不到my-default.cnf及my.cnf
转自：http://www.cnblogs.com/gerald-x/p/6913877.html
首先请确认正确安装好MySQL.1- 先配置环境变量path1.1 打开终端,输入： cd ~会进入~文件夹,1.2 然后输入：touch .bash_profile回车执行后,1.3 再输入：open -e .bash_profile会在TextEdit中打开这个文件(如果以前没有配置过环境变量,那么这应该是一个空白文档).如果有内容,请在结束符前输入,如果没有内容,请直接输入如下语句:export PATH=${PATH}:/usr/local/mysql/bin然后,保存,退出TextEdit(一定是退出),关闭终端并退出.此时应该可以直接用以下语句登入MySQL了>mysql -uroot -p 1.4 关闭MySQL!!!!(在系统偏好设置里面关闭MySQL)2- 重点来了!!!2.1 查看一下support-files文件夹(Finder下"前往文件夹";
路径:/usr/local/mysql/support-files)里面有没有my-default.cnf或my.cnf文件...如果有则直接打开添加在[client] 在下面添加
default-character-set=utf8 默认字符集为utf8
在[mysqld] 添加
default-character-set=utf8 默认字符集为utf8
init_connect='SET NAMES utf8' （设定连接mysql数据库时使用utf8编码，以让mysql数据库为utf8运行）
修改好后，重新启动mysql查看当前数据编码格式。
>show variables like '%char%';
+--------------------------+----------------------------+
| Variable_name | Value |
+--------------------------+----------------------------+
| character_set_client | utf8 |
| character_set_connection | utf8 |
| character_set_database | utf8 |
| character_set_filesystem | binary |
| character_set_results | utf8 |
| character_set_server | utf8 |
| character_set_system | utf8 |
| character_sets_dir | /usr/share/mysql/charsets/ |
+--------------------------+----------------------------+
若终端出现如上样式则OK了,否则继续往下看:2.2 support-files文件夹里面没有my-default.cnf或my.cnf文件,那么就要在/etc下新建my.cnf$ cd /etc$ sudo vim my.cnf2.3 进行完上步操作后会进入vim模式,此时复制(***文本)的内容粘贴进去,,(不包含***文本 );
2.4 粘贴成功后注意看vim的第一行"#"有没有丢掉(本人就丢过~~哈哈~),都OK的话点esc退出编辑,:wq!--保存后强制退出.[附几个编辑命令:dd删除光标所在行;
dw删除一个字(word);
x删除当前字符]. (***文本): # Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
default-character-set=utf8
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
character-set-server=utf8
init_connect='SET NAMES utf8
port = 3306
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
character-set-server=utf8
init_connect='SET NAMES utf8'
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin# binary logging format - mixed recommended
binlog_format=mixed# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=,
# MASTER_USER=, MASTER_PASSWORD= ;
#
# where you replace , , 【mac终端下修改MySQL的编码格式--找不到my-default.cnf及my.cnf】 by quoted strings and
# by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host =
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user =
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port =
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/data
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/data
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50[mysqldump]
quick
max_allowed_packet = 16M[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set=utf8[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M[mysqlhotcopy]
interactive-timeout
推荐阅读
