锐客网

  1. 首页 > 睿知 > >

爱普生353清零步骤

经验分享睿知

Step 1: Disconnect the power cord of the EPSON 353 printer from the power source.
Step 2: Turn off the printer and open the top cover.
Step 3: Locate the paper cassette and remove it from the printer.
Step 4: Take out the drum unit from the printer.
Step 5: To reset the printer, press and hold the “Go” button for more than 4 seconds.
Step 6: Then release the “Go” button and turn off the printer.
Step 7: Reconnect the power cord of the EPSON 353 printer to the power source and turn on the printer.
Step 8: Open the top cover again and reinsert the paper cassette.
Step 9: Take out the drum unit from the printer.
Step 10: Reinsert the drum unit back into the printer.
Step 11: Close the top cover and press the “Go” button once.
【爱普生353清零步骤】Step 12: When the printer starts, a message “Printer is reset to factory defaults” will be displayed on the display panel.
Step 13: Again, turn off the printer and disconnect the power cord from the power source.
Step 14: Press and hold the “Go” button for more than 4 seconds and then release the “Go” button.
Step 15: Reconnect the power cord to the power source and switch on the printer.
Step 16: Again open the top cover, take out the drum unit and reinsert the drum unit.
Step 17: Close the top cover and press the “Go” button once.
Step 18: Refresh the printer settings and set the language, region and other preferences.
Step 19: Finally, print a test page to check whether the reset process was successful.

    推荐阅读


    上一篇：爱普生固件升级导致出现错误

    下一篇：佳能m6相机使用教程图解 佳能m6相机使用教程