Canon 398 5B02 fault has become a relatively common problem encountered by Canon camera users. Below is an introduction on how to solve the Canon 398 5B02 fault.
1. First of all, check if any lens elements are stuck or twisted. If so, carefully remove them and make sure the camera lens is properly aligned.
2. Disconnect the battery from the camera and then remove the lens. Check if any dirt or dust particles have accumulated on the contact points of the lens. If so, use a clean and dry cloth to clean the contact points.
3. After cleaning the contact points, reconnect the battery and the lens.
【佳能398 5b02故障】4. If the problem persists, try resetting the camera settings. This can be done through the settings menu on the camera.
5. If the issue is still not resolved, then there is the possibility that the camera is suffering from an internal hardware defect. In this case, the best course of action is to take the camera to a qualified service center to get it checked/repaired.
In conclusion, Canon 398 5B02 fault is a relatively common problem that can affect the performance of a Canon camera. If the problem is not solved by resetting the camera settings or cleaning the lens contact points, then it is best to take the camera to a qualified service center for repair.
推荐阅读
- 佳能打印机主板怎么清零了
- 佳能3620废墨垫更换
- 佳能打印机mp530清零
- 如何解决云鲸服务器故障？ 云鲸服务器故障怎么修复
- 佳能2780清零软件官方
- 佳能mg2540s主板废墨
- canon ip1180墨盒清零软件
- 游戏大全游戏盒,游戏盒4399
- 一致性分析对照表