行是知之始,知是行之成。这篇文章主要讲述12-docker系列-docker之compose如何上手使用相关的知识，希望能为你提供帮助。
??声明：本文乃“运维家”原创，转载请注明出处，更多内容请关注公众号“运维家”。??
??主旨??
上文已经介绍了compose的安装以及相关命令，那么本文我们就开始详细的说下具体该如何使用呢，compose的配置文件又该如何去写呢？往下看。
??环境??
linux环境
docker环境
docker-compose环境
??举栗子??
?PS：推荐执行docker-compose的时候，要切换到docker-compose.yml配置文件同目录下执行。?
?1、使用docker-compose管理多个容器?
[yunweijia@localhost ~]$ mkdir -pv docker/compose/test01
mkdir: 已创建目录 "docker/compose"
mkdir: 已创建目录 "docker/compose/test01"
[yunweijia@localhost ~]$ cd docker/compose/test01/
[yunweijia@localhost test01]$ touch docker-compose.yml
[yunweijia@localhost test01]$ vim docker-compose.yml
version: 2
services:
nginx:
image: nginx:latest
redis:
image: redis:latest
[yunweijia@localhost test01]$
上面的例子的意思是同时管理redis和nginx镜像，我们启动它，如下：
[yunweijia@localhost test01]$ sudo docker-compose up -d
Creating network "test01_default" with the default driver
Creating test01_redis_1 ... done
Creating test01_nginx_1 ... done
[yunweijia@localhost test01]$
[yunweijia@localhost test01]$ sudo docker-compose ps
NameCommandStatePorts
------------------------------------------------------------------
test01_nginx_1/docker-entrypoint.sh ngin ...Up80/tcp
test01_redis_1docker-entrypoint.sh redis ...Up6379/tcp
[yunweijia@localhost test01]$
关闭他，如下：
[yunweijia@localhost test01]$ sudo docker-compose stop
Stopping test01_redis_1 ... done
Stopping test01_nginx_1 ... done
[yunweijia@localhost test01]$ sudo docker-compose ps
NameCommandStatePorts
----------------------------------------------------------------
test01_nginx_1docker-entrypoint.sh redis ...Exit 0
test01_redis_1/docker-entrypoint.sh ngin ...Exit 0
[yunweijia@localhost test01]$
停止之后，再次查看的时候，发现state已经变成了exit，然后我们删除它，防止影响到我们接下来做的实验；
[yunweijia@localhost test01]$ sudo docker-compose rm
Going to remove test01_redis_1, test01_nginx_1
Are you sure? [yN] y
Removing test01_redis_1 ... done
Removing test01_nginx_1 ... done
[yunweijia@localhost test01]$ sudo docker-compose ps
NameCommandStatePorts
------------------------------
[yunweijia@localhost test01]$
?2、使用docker-compose做端口映射?
语法：
ports：
- “宿主机端口:容器端口”# 同样的，宿主机端口可以不等于容器端口
实例：
[yunweijia@localhost test01]$ mkdir -pv /home/yunweijia/docker/compose/test02
mkdir: 已创建目录 "/home/yunweijia/docker/compose/test02"
[yunweijia@localhost test01]$ cd /home/yunweijia/docker/compose/test02/
[yunweijia@localhost test02]$ touch docker-compose.yml
[yunweijia@localhost test02]$ vim docker-compose.yml
version: 2
services:
nginx:
image: nginx:latest
ports:
- "80:80"
redis:
image: redis:latest
ports:
- "6379:6379"
[yunweijia@localhost test02]$
上面的意思是在第一个例子的前提上，将端口号映射到宿主机上，方便我们使用，下面我们启用并验证他；
[yunweijia@localhost test02]$ sudo docker-compose up -d
Starting test02_redis_1 ... done
Starting test02_nginx_1 ... done
[yunweijia@localhost test02]$ sudo docker-compose ps
NameCommandStatePorts
--------------------------------------------------------------------------------------------------
test02_nginx_1/docker-entrypoint.sh ngin ...Up0.0.0.0:80->
80/tcp,:::80->
80/tcp
test02_redis_1docker-entrypoint.sh redis ...Up0.0.0.0:6379->
6379/tcp,:::6379->
6379/tcp
[yunweijia@localhost test02]$
[yunweijia@localhost test02]$ sudo firewall-cmd --add-port=80/tcp --permanent
success
[yunweijia@localhost test02]$ sudo firewall-cmd --add-port=6379/tcp --permanent
success
[yunweijia@localhost test02]$ sudo firewall-cmd --reload
success
[yunweijia@localhost test02]$
浏览器访问验证nginx：
redis同理，就不进行验证了；然后我们停止并删除这两个容器，以防对我们接下来的内容有影响；
[yunweijia@localhost test02]$ sudo docker-compose stop
Stopping test02_nginx_1 ... done
Stopping test02_redis_1 ... done
[yunweijia@localhost test02]$ sudo docker-compose rm
Going to remove test02_nginx_1, test02_redis_1
Are you sure? [yN] y
Removing test02_nginx_1 ... done
Removing test02_redis_1 ... done
[yunweijia@localhost test02]$ sudo docker-compose ps
NameCommandStatePorts
------------------------------
[yunweijia@localhost test02]$
?3、使用docker-compose设置网络模式?
语法：
network_mode: "模式"
实例：
[yunweijia@localhost test02]$ mkdir -pv /home/yunweijia/docker/compose/test03
mkdir: 已创建目录 "/home/yunweijia/docker/compose/test03"
[yunweijia@localhost test02]$ cd /home/yunweijia/docker/compose/test03/
[yunweijia@localhost test03]$ touch docker-compose.yml
[yunweijia@localhost test03]$ vim docker-compose.yml
version: 2
services:
nginx:
image: nginx:latest
network_mode: "host"
redis:
image: redis:latest
network_mode: "none"
[yunweijia@localhost test03]$
以上redis使用的是null网络模式，nginx使用的是host网络模式，这两种模式如果忘记具体是什么意思的话，可以翻看往期内容，下面我们来启动验证他：
[yunweijia@localhost test03]$ sudo docker-compose up -d
Creating test03_nginx_1 ... done
Creating test03_redis_1 ... done
[yunweijia@localhost test03]$ sudo docker-compose ps
NameCommandStatePorts
---------------------------------------------------------------
test03_nginx_1/docker-entrypoint.sh ngin ...Up
test03_redis_1docker-entrypoint.sh redis ...Up
[yunweijia@localhost test03]$
由于redis是null模式，所以无法访问到，那么我们直接访问nginx进行验证试一下（PS：80端口的防火墙，在第二个例子中就已经放开了，此处略过此步骤）：
我们停止并删除这两个容器，以防对下面实验有影响：
[yunweijia@localhost test03]$ sudo docker-compose stop
Stopping test03_redis_1 ... done
Stopping test03_nginx_1 ... done
[yunweijia@localhost test03]$ sudo docker-compose rm
Going to remove test03_redis_1, test03_nginx_1
Are you sure? [yN] y
Removing test03_redis_1 ... done
Removing test03_nginx_1 ... done
[yunweijia@localhost test03]$
?4、使用docker-compose设置文件共享?
[yunweijia@localhost test03]$ mkdir -pv /home/yunweijia/docker/compose/test04
mkdir: 已创建目录 "/home/yunweijia/docker/compose/test04"
[yunweijia@localhost test03]$ cd !$
cd /home/yunweijia/docker/compose/test04
[yunweijia@localhost test04]$ mkdir logs
[yunweijia@localhost test04]$ touch docker-compose.yml
[yunweijia@localhost test04]$ vim docker-compose.yml
version: 2
services:
nginx:
image: nginx:latest
volumes:
- /home/yunweijia/docker/compose/test04/logs:/var/log/nginx
network_mode: "host"
redis:
image: redis:latest
[yunweijia@localhost test04]$
以上例子是将nginx的日志，放置到了宿主机，我们启动验证他：
[yunweijia@localhost test04]$ sudo docker-compose up -d
Creating test04_redis_1 ... done
Creating test04_nginx_1 ... done
[yunweijia@localhost test04]$ sudo docker-compose ps
NameCommandStatePorts
------------------------------------------------------------------
test04_nginx_1/docker-entrypoint.sh ngin ...Up
test04_redis_1docker-entrypoint.sh redis ...Up6379/tcp
[yunweijia@localhost test04]$
浏览器访问几次：
【12-docker系列-docker之compose如何上手使用】
看下日志文件是否共享出来了：
[yunweijia@localhost test04]$ cd logs/
[yunweijia@localhost logs]$ ls
access.logerror.log
[yunweijia@localhost logs]$ cat access.log
192.168.112.1 - - [18/Feb/2022:07:51:16 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (Khtml, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
192.168.112.1 - - [18/Feb/2022:07:51:16 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
192.168.112.1 - - [18/Feb/2022:07:51:16 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
192.168.112.1 - - [18/Feb/2022:07:51:16 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
192.168.112.1 - - [18/Feb/2022:07:51:16 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
192.168.112.1 - - [18/Feb/2022:07:51:17 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Windows NT 10.0;
Win64;
x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/98.0.4758.102 Safari/537.36" "-"
[yunweijia@localhost logs]$
我们停止并删除这两个容器，以防对下面实验有影响：
[yunweijia@localhost test04]$ sudo docker-compose stop
Stopping test04_redis_1 ... done
Stopping test04_nginx_1 ... done
[yunweijia@localhost test04]$ sudo docker-compose rm
yGoing to remove test04_redis_1, test04_nginx_1
Are you sure? [yN]
Removing test04_redis_1 ... done
Removing test04_nginx_1 ... done
[yunweijia@localhost test04]$
?5、如果相同的镜像和环境，想启动多个容器?
[yunweijia@localhost test04]$ mkdir -pv /home/yunweijia/docker/compose/test05
mkdir: 已创建目录 "/home/yunweijia/docker/compose/test05"
[yunweijia@localhost test04]$ cd !$
cd /home/yunweijia/docker/compose/test05
[yunweijia@localhost test05]$ touch docker-compose.yml
[yunweijia@localhost test05]$ vim docker-compose.yml
version: 2
services:
nginx:
image: nginx:latest
redis:
image: redis:latest
[yunweijia@localhost test05]$ sudo docker-compose up -d --scale nginx=3
Creating network "test05_default" with the default driver
Creating test05_nginx_1 ... done
Creating test05_nginx_2 ... done
Creating test05_nginx_3 ... done
Creating test05_redis_1 ... done
[yunweijia@localhost test05]$
以上示例中，我们将启动了3个nginx镜像，但是redis不受影响，还是一个，如果我们想进入启动了多个的nginx容器中，需要指定容器ID，如下：
[yunweijia@localhost test05]$ sudo docker-compose exec --index=2 nginx bash
root@f50418f6d919:/# exit
exit
[yunweijia@localhost test05]$ sudo docker-compose exec --index=1 nginx bash
root@23e004cc5330:/# exit
exit
[yunweijia@localhost test05]$
停止并删除这4个容器，如下：
[yunweijia@localhost test05]$ sudo docker-compose stop
Stopping test05_nginx_3 ... done
Stopping test05_nginx_2 ... done
Stopping test05_redis_1 ... done
Stopping test05_nginx_1 ... done
[yunweijia@localhost test05]$ sudo docker-compose rm
Going to remove test05_nginx_3, test05_nginx_2, test05_redis_1, test05_nginx_1
Are you sure? [yN] y
Removing test05_nginx_3 ... done
Removing test05_nginx_2 ... done
Removing test05_redis_1 ... done
Removing test05_nginx_1 ... done
[yunweijia@localhost test05]$
至此，docker-compose的介绍结束，当然了，远远不止这些参数，也不止如此的简单，这里只是把经常用的列出来了，要深入研究还是要查看官网，这里负责让你入门。
下来我们将写下harbor仓库如何搭建以及如何使用，各位老板有什么问题欢迎后台留言。
推荐阅读
- #yyds干货盘点#LVM逻辑卷管理器
- KiCad镜像下载与安装
- docker的几个特殊参数备注
- Linus 在 1994 年被丢失的演讲录音公开
- Python逻辑运算符用法示例指南
- Python–使用PRAW制作Reddit机器人示例
- Python数据分析的数学运算指南
- Python成员和标识操作符详细指南
- Python Tkinter中的菜单小部件用法