锐客网

  1. 首页 > 睿知 > >

爱普生l363废墨垫6

经验分享睿知

Epson L363 Waste Ink Pad is an important component of the Epson L363 Inkjet Printer. It is a sponge-like material that absorbs excess ink during the printing process. The Waste Ink Pad absorbs and stores the ink from the print head cleaning process, as well as from any other accidental ink spills or leakage.
The Waste Ink Pad should be replaced or cleaned periodically, or when it becomes full, to prevent the printer from malfunctioning. Over time, the absorbed ink will start to leak onto the printer, which can cause serious damage to the printer. Regular replacement of the Waste Ink Pad is therefore essential in order to maintain your printer in good working order.
In order to replace or clean the Waste Ink Pad, you will first need to remove the waste tray from the rear of the printer. Then, carefully remove the printer’s casing and locate the Waste Ink Pad. It is important to note that the Waste Ink Pad is not visible as it is held in place by a plastic frame. To access the Waste Ink Pad, you will need to remove the plastic frame.
Once you have accessed the Waste Ink Pad, you can either replace it with a new one or clean it. To clean the Waste Ink Pad, use a cloth and specialized ink absorber solution. Carefully wipe the Ink Pad with the cloth, and then cover it with the ink absorber solution. Wait for 10 to 15 minutes for the solution to absorb the ink and then replace the Waste Ink Pad into the plastic frame.
Finally, replace the printer’s casing, reattach the waste tray, and your Epson L363 Waste Ink Pad should be ready for use. Remember to perform this maintenance regularly to ensure that your printer remains in good working order.
【爱普生l363废墨垫6】总结：
Epson L363废墨垫是墨水打印机Epson L363的重要部分，它是一种海绵状的材料，可以吸收打印过程中的多余墨水 。废墨垫可以吸收并储存打印头清洁过程中的墨水 ， 以及任何意外的墨水泄漏或渗漏 。废墨垫应该定期更换或清洁，以防止打印机发生故障 。为了更换或清洁废墨垫，首先需要从打印机后面移除废物托盘，然后仔细拆下打印机外壳 ， 找到废墨垫 。废墨垫不可见，因为它被一个塑料框固定在位 。为了访问废墨垫 ， 您需要拆下塑料框 。拆下废墨垫后，可以用新的替换或清洁它 。要清洁废墨垫，使用布和专用墨水吸收剂 。用布仔细擦拭墨水垫，然后用墨水吸收剂覆盖 。等待10到15分钟，让溶液吸收墨水，然后将废墨垫放回塑料框中 。最后，重新安装打印机外壳 ， 重新安装废物托盘，Epson L363废墨垫就准备就绪 。记住要定期进行此维护，以确保打印机保持良好的工作状态 。

    推荐阅读


    上一篇：爱普生ip1880清零

    下一篇：爱普生L130废墨仓破解