锐客网

  1. 首页 > 睿知 > >

佳能ip 1900废墨清零

经验分享睿知

Canon iP1900 Ink Cartridge Reset
Canon iP1900 is a popular printer for home and small business use. It is known for its good quality prints and long-lasting ink cartridges. However, once the cartridges run out of ink, it can be difficult to reset them. This requires some technical knowledge and a few steps to correctly reset the ink cartridges.
First, you will need to disconnect the power cord from your printer and locate the small reset button near the ink cartridge port. Once you have found it, hold down the reset button for a few seconds and the printer will turn off.
Next, disconnect the printer cable from the computer and re-connect the power cord. Press the power button to turn the printer back on.
Now that the printer is on, gently press and hold the reset button for a few seconds until you hear a noise. This noise is the reset signal telling the printer that the cartridges are now empty.
After you hear the noise, open the printer’s lid and remove the empty ink cartridges. Replace them with new cartridges and then close the lid.
Finally, press the reset button again for a few seconds and the printer will now be ready to use. The reset process is now complete and your printer will be ready to print again.
【佳能ip 1900废墨清零】By following these steps, you can easily reset the Canon iP1900 ink cartridges and start using your printer again. It’s important to remember that the reset process should only be done when replacing empty cartridges. Doing it too frequently can cause problems and can lead to expensive repairs.

    推荐阅读


    上一篇：佳能mf113w清零软件

    下一篇：佳能3680打印机清零方法图解